Where can I find a replacement switch (part fa2 10/2b) for the FERM HDM1037 hammer drill?
According to the FERM HDM1037 instruction manual, the internal switch is listed as Spare Part No. 471079 (Position 47 in the exploded view). To…
Manuals+ Q&A
Drill questions & answers
Browse answered questions about Drill, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Where is the official service center in San Juan, Argentina, and why does the motor move so much and remain loose?
Regarding the official service center in San Juan, Argentina, Einhell provides service contacts through their global portal at www.Einhell-Service.com. You can use the contact…
Can the motor in my Makita XPH07 drill be repaired if it smells like it is burning, and how much will it cost?
A burning smell from your Makita XPH07 often indicates an electrical short, worn carbon brushes (if applicable, though this model uses a brushless motor),…
What does a solid yellow light and a locked speed spiral mean on the HEBECA ND2001 nail drill?
Based on the HEBECA ND2001 manual and common troubleshooting for this model, a solid yellow light combined with a frozen speed indicator usually indicates…
How do I use the screwdriving function and control the rotation speed?
To use the EasyImpact 600 for screwdriving and to control its speed, follow these instructions from the manual: Screwdriving Mode: Set the selector switch…
Why is the drill carriage movement very stiff?
If the carriage (elevating body) of your VEVOR Z1Z-9230 Diamond Core Drill is moving stiffly or vibrating, it is likely due to an improper…
Why is my OHZOIRIC VC-008A cordless nail drill failing to operate after minimal use?
We are sorry to hear that your OHZOIRIC VC-008A Cordless Nail Drill has failed to operate. Based on the user manual, there is a…
The instructions and pictures in the user manual are difficult to read and unclear. Can you provide a clearer explanation of the drill bits?
To help clarify the instructions for your HEBECA ND2001, here is a breakdown of the drill bits and their specific uses based on the…
How do I use the small needle-like attachments on natural nails with the Mercedes DM298 nail drill?
The small needle-like attachments (often referred to as needle bits) are typically used for delicate work such as cleaning under the nail, removing stubborn…
Where can I find a replacement battery for a Rovus cordless drill with a charger jack?
The manual provided is for the FERM CDM1164 20V Cordless Drill, which uses the FX-POWER 20V battery platform (Model CDA1167 for 2.0Ah or CDA1168…
Where can I get a replacement switch for the WORKPRO Z1C-DS-26FW rotary hammer drill?
The manual for the WORKPRO Z1C-DS-26FW indicates that for safety and reliability, any maintenance or adjustments should be performed by an Authorized Service Center.…
What is the pin count and connector type for the MelodySusie DR-2036 Shine handpiece?
The MelodySusie DR-2036 Shine Electric Nail Drill typically uses a standard 3-pin connector for its handpiece (often referred to as the "pen" or "pluma").…
Why is my BCD700S battery not charging and showing a flashing red light?
Based on the BLACK+DECKER BCD700S manual, here is how to address your charging issue: Temperature Check: The charger is designed not to charge if…
Why is my PBSA 12 E4 cordless drill not working even though the battery is charged and the light is on?
Based on your description of the PARKSIDE PBSA 12 E4, if the battery is charged and the LED light is working but the motor…
Why is my Milwaukee 2803-20/2804-20 drill struggling to drive a screw through pine board?
It is frustrating when a powerful tool doesn't perform as expected. For driving screws into softwood like pine with your Milwaukee M18 FUEL Drill/Driver,…
Which drill bit should I use for shaping fingernail tips?
Based on the HEBECA ND2001 Drill Bits Instruction, the most suitable bit for shaping and trimming fingernail tips is the Coarse Disc Bit. This…
This is not a cordless drill, it's a cordless jigsaw.
You are absolutely correct! The Metabo ST 18 L 90 is indeed a cordless jigsaw, not a cordless drill. The manual provided on Manuals+…
How can I change the chuck on the Einhell TP-CD 18-60 Li-i BL drill?
To change or replace a tool (drill bit or screwdriver bit) in the chuck of your Einhell TP-CD 18-60 Li-i BL, follow these steps…
Where can I find a contact number or address for an authorized service center to repair my broken FERM drill?
Hello. For repairs on your FERM CDM1158 cordless drill, it is recommended to use an authorized service center, as your local repair person advised.…
What is the part number for the replacement carbon brushes for the Dexter 900ID2.5 impact drill?
The provided instruction manual for the Dexter 900ID2.5 Impact Drill does not list specific part numbers for replacement carbon brushes. Typically, for Dexter power…
Do you always have to take apart the Ryobi P214 hammer drill to reset the electric trigger?
Based on the Ryobi P214 Operator's Manual, there is no mention of a manual "reset" procedure for the electric trigger that requires taking the…
How can I get a replacement power cable for my MelodySusie DR-2036 Shine Electric Nail Drill due to a loose connection?
It is possible to resolve this issue by obtaining a replacement power supply or power control device. According to the MelodySusie DR-2036 manual, if…
Where can I find a replacement battery charger for the Blaupunkt CD3010 cordless drill?
The Blaupunkt CD3010 uses a specific charger that connects directly into a socket on the battery pack rather than a traditional charging dock. According…
Why is my IKEA FIXA 7.2V drill not charging or showing a red light, and what are the charger specifications?
If your IKEA FIXA 7.2V drill is not charging and the red LED is not lighting up, please check the following troubleshooting steps and…