How do I set up the Cel-Fi GO X MIMO kit?
Sure! Here are the step-by-step instructions for setting up the Cel-Fi GO X MIMO kit: 1. Read the instruction manual thoroughly: Before you begin…
Manuals+ Q&A
Cel-Fi questions & answers
Browse answered questions about Cel-Fi, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Can I use any external antenna with the Cel-Fi SOLO RED 0.5W ERCES Public Safety BDA?
No, you can only use the antennas listed in the Antenna Kitting section of the user manual with the Cel-Fi SOLO RED 0.5W ERCES…
How do I determine the best location for the Main Unit of the CEL-FI CONNECT C41 Nextivity to ensure performance?
To determine the best location for the Main Unit of the CEL-FI CONNECT C41 Nextivity for optimal performance, follow these steps: 1. Select Donor…
How to set up and configure the Cel-Fi QUATRA 4000/4000i Enterprise Cellular Coverage system in their building?
To set up and configure the Cel-Fi QUATRA 4000/4000i system in your building, follow these steps based on the information provided in the user…
How do I charge the Cel-Fi COMPASS XR scanning receiver?
To charge the Cel-Fi COMPASS XR scanning receiver, follow these steps: 1. Use the included USB-C charger with the appropriate plug adapter for your…
How do I change the mode and carrier on the Cel-Fi GO+ Smart Signal Booster using the Cel-Fi WAVE app?
To change the mode and carrier on your Cel-Fi GO+ Smart Signal Booster using the Cel-Fi WAVE app, follow these steps: **Changing Modes Between…
How should I install antennas for the NEXTIVITY CEL-FI Quatra 4000c to comply with FCC RF Exposure requirements?
To comply with FCC RF Exposure requirements for the NEXTIVITY CEL-FI Quatra 4000c, follow these guidelines for antenna installation: - The donor antenna must…