Artograph questions & answers

The Artograph LightPad 930 LX requires a specific 12-Volt power adapter to operate. If your unit is missing this component, you have a few…

For the Artograph Prism and Super Prism projectors, the compatible table stand is the Prism Table Stand (Item #225-206). This accessory allows the projector…

To connect your laptop to the Artograph LED200 Digital Projector, you will need an HDMI cable or a VGA cable (depending on the available…

Adjusting the projection size on the Artograph Dal Molin Tracer Projector is a simple process. Here's how you can change the size of the…

To adjust the image size when using the Artograph 225360 Tracer Projector, follow these steps: 1. Place your desired artwork or image face-up on…

To install the lens on the Artograph 225-090 Prism Projector, follow these steps: 1. Start by rolling down the rubber "O" ring (#2) to…

To use the Artograph ‎25370 Opaque Art Projector for tracing and enlarging images, follow these steps: 1. Set up the projector: Place the projector…

To adjust the focus on the Artograph 25115 Flare Digital Art Projector, follow these steps: 1. Turn on the projector and wait for it…

To set up the Artograph EZ Tracer Projector, please follow these steps: 1. Unpack the projector and ensure that all the components are included.…

If your file is not appearing in the main menu of the Artograph Flare 450 projector for projection, you can troubleshoot the issue by…