How do I pair a new remote controller to the Rayrun P30 RGB Wireless Remote LED Controller?
To pair a new remote controller to the Rayrun P30 RGB Wireless Remote LED Controller, follow these steps:
1. Unplug the power of the main unit and wait for at least 5 seconds.
2. Plug in the power of the main unit again.
3. Within 10 seconds after the main unit is powered on, press and hold the "▲" and "▼" keys on the remote controller simultaneously for about 3 seconds.
This will pair the new remote controller to the main unit. You can pair up to 5 remote controllers to one main unit, and each remote controller can be paired to any main unit.
Note: If you only want to keep the current remote controller and dis-pair all other remote controllers, you can simply pair the current remote controller to the main unit again. The main unit will automatically dis-pair all other remote controllers and recognize the current one only.
Answer this question
Answers are reviewed before publication.