How do I fill the Dupray Neat Multi-Use Steam Cleaner with water?
I just purchased the Dupray Neat Multi-Use Steam Cleaner and I'm not sure how to fill it with water. Can you provide step-by-step instructions?
To fill the Dupray Neat Multi-Use Steam Cleaner with water, follow these steps:
1. Unscrew and remove the boiler cap located on the top of the unit.
2. Pour clean water into the boiler until it is full. The maximum capacity is 40 oz. (1200 ml).
3. It is recommended to use distilled or de-mineralized water to minimize potential build-up of mineral deposits.
4. Be sure to only use water and not other cleaning agents, as they could damage the unit or cause injury.
5. Once the boiler is filled with water, securely xxxx the boiler cap back on.
6. If you need to refill the unit during or after use, press and hold the steam trigger to release all the remaining steam.
7. Allow the unit to cool down for at least 20 minutes before opening the boiler cap to refill it.
8. Repeat the filling process as described above.
Please note that it is important to follow these instructions to ensure safe and proper usage of the steam cleaner. Always refer to the instruction manual for more detailed information and safety precautions.
Answer this question
Answers are reviewed before publication.