How do I replace the batteries in the Homemory Electric Fake Candles Tealights?
I've been using my Homemory Electric Fake Candles Tealights for a while now, and the LED flame seems to be getting dimmer. I think it's time to replace the batteries, but I'm not sure how to do it. Can you provide instructions on how to replace the batteries in these tealights?
To replace the batteries in the Homemory Electric Fake Candles Tealights, follow these steps:
1. Turn off the tealight by flipping the switch on the bottom to the "off" position.
2. Carefully remove the tealight from its holder or arrangement.
3. Locate the battery compartment on the bottom of the tealight.
4. Use a small screwdriver or a coin to twist and open the battery compartment cover.
5. Take out the old CR2032 lithium coin battery from the compartment.
6. Insert a fresh CR2032 lithium coin battery into the compartment, ensuring that the positive (+) side is facing up.
7. Close the battery compartment cover by twisting it back into place.
8. Place the tealight back into its holder or arrangement.
9. Turn on the tealight by flipping the switch on the bottom to the "on" position.
Make sure to use fresh, high-quality batteries for optimal performance. If the LED flame continues to appear dim or flicker inconsistently after replacing the batteries, it may be a sign of a different issue, and you may need to contact the manufacturer's customer support for further assistance.
Answer this question
Answers are reviewed before publication.