How do I pair my Altec Lansing Nanophones Noise Cancelling Headphones with my device?

To pair your Altec Lansing Nanophones Noise Cancelling Headphones with your device, please follow these steps:

1. Make sure your Nanophones are in pairing mode. You can do this by turning on the headphones and ensuring that the Bluetooth indicator light is flashing.
2. On your device, open the "Settings" menu and navigate to the Bluetooth settings.
3. Tap on "Bluetooth" to enable it if it's not already turned on.
4. Your device will start scanning for available Bluetooth devices. Wait for it to detect the Altec Lansing Nanophones in the list of available devices.
5. Once the Nanophones appear in the list, tap on them to initiate the pairing process.
6. Your device may prompt you to enter a PIN or passcode. If required, enter "0000" as the PIN and tap "OK" or "Pair" to confirm.
7. The Nanophones will now be paired with your device. The Bluetooth indicator light on the headphones should stop flashing and remain solid.
8. You can now start using your Altec Lansing Nanophones Noise Cancelling Headphones with your device for wireless audio playback.

Note: It's important to ensure that the headphones are in pairing mode and that Bluetooth is enabled on your device for successful pairing.