How do I program tracks when listening to a CD on the Boytone BT-28SPB Record Vinyl?
To program tracks when listening to a CD on the Boytone BT-28SPB Record Vinyl, follow these steps:
1. Make sure the CD is inserted into the CD tray and the device is turned on.
2. Press the "PROG" button on the remote control or the unit.
3. The display will show "MEM" and indicate the program number and digits for the track number to be programmed.
4. Use the "SKIP UP" or "SKIP DOWN" button to select the desired track.
5. Press the "PROG" button again to store the track into the memory.
6. Repeat steps 4 and 5 to add more tracks to the program.
7. Once all desired tracks are programmed, press the "PLAY/PAUSE" button to start playing the tracks in the assigned order.
Note: If you want to cancel the programming, press the "STOP" button twice.
Please refer to the Boytone BT-28SPB Record Vinyl user guide for more detailed instructions and illustrations.
Original question and details
I want to listen to specific tracks on a CD and not all of them. How can I program the tracks on this device?
Answer this question
Answers are reviewed before publication.