How do I pair the Lucid Audio HLT-NHE-BT-P Amped HearBand with my Bluetooth device?
I'm having trouble connecting my Lucid Audio HLT-NHE-BT-P Amped HearBand to my smartphone via Bluetooth. I've tried following the instructions, but I can't seem to get them paired. Can you provide step-by-step instructions on how to pair the device with a Bluetooth device?
To pair the Lucid Audio HLT-NHE-BT-P Amped HearBand with your Bluetooth device, please follow these steps:
1. Make sure the Lucid Audio HLT-NHE-BT-P Amped HearBand is turned on by sliding the Power switch to the ON position.
2. Press the pairing button on the HearBand to initiate Bluetooth pairing mode. The LED on the HearBand will flash blue then red to indicate that it is in pairing mode.
3. On your Bluetooth-enabled device (e.g., smartphone), follow the manufacturer's instructions to locate and connect to "Lucid Audio NHE BT" in the list of available Bluetooth devices. The LED on the HearBand will flash blue every few seconds once it is paired.
4. Once the pairing is successful, the HearBand and your Bluetooth device will be connected. You can now use the HearBand to listen to music or take calls wirelessly.
If you are still having trouble pairing your device, please refer to the user manual provided with the Lucid Audio HLT-NHE-BT-P Amped HearBand for additional troubleshooting steps.
Answer this question
Answers are reviewed before publication.