How do I pair my Bluetooth device with the Denon Professional DN-200BR?
To pair your Bluetooth device with the DN-200BR, follow these steps:
1. Ensure that the DN-200BR is powered on and connected to a power source using the included power adapter. The status light on the DN-200BR will flash slowly.
2. Make sure your Bluetooth device has its Bluetooth connectivity turned on and is within range of the DN-200BR. The DN-200BR will automatically try to pair with the last-paired Bluetooth device, if any.
3. If you want to use a different Bluetooth device or if the DN-200BR is not paired with any device, press and hold the Pair button on the DN-200BR for 3 seconds. The status light will start flashing quickly.
4. On your Bluetooth device, go to its Bluetooth settings menu and select the DN-200BR as the device to pair with. Some older Bluetooth devices may require you to enter a PIN, in which case you should enter "0000" as the PIN.
5. Once paired, you can start playing audio on your Bluetooth device, and it will be sent out of the DN-200BR's outputs (balanced and unbalanced).
Note: While the DN-200BR is paired with a Bluetooth device, other Bluetooth devices cannot pair with it. If you want to pair a different Bluetooth device, you must unpair the current device from the DN-200BR first.
For more detailed information and troubleshooting, refer to the complete owner's guide available at the following link: [Denon Professional DN-200BR Owner's Guide](https://www.manualslib.com/download/1...)
Answer this question
Answers are reviewed before publication.