Questions manuals.plus asks 2024-12-26 10:45:00

How do I connect the Donner DSP-003 to my keyboard?

I recently purchased the Donner DSP-003 Electronic Keyboard Piano Pedal, but I'm not sure how to connect it to my keyboard. Can you provide step-by-step instructions on how to properly connect the pedal?

Accepted answer manuals.plus 2024-12-26 10:47:00
Donner-DSP-003-Electronic-Keyboard-Piano-Pedal-PRODUCT
Connecting the Donner DSP-003 to your keyboard is a simple process. Here's a step-by-step guide:

1. Locate the sustain pedal jack on your keyboard or digital piano. It is usually labeled as "Sustain" or "Pedal."

2. Take the 1/4" connector that comes with the Donner DSP-003 and plug it into the sustain pedal jack of your keyboard. Ensure that the connector is securely inserted.

3. Once the pedal is connected, position it on the floor where it is comfortable for your foot to reach.

4. You are now ready to use the pedal. Pressing down on the pedal will sustain the notes you play, and releasing it will stop the sustaining effect.

Please refer to the user manual that comes with the Donner DSP-003 for any additional information or troubleshooting tips.
DonnerElectronic KeyboardPiano Pedal
Open related manual Ask another question
Which way should I set the polarity switch on the side of the Donner DSP-003 when using it with a Casio CT-S1? 1 answer • The switch on the right side of your Donner DSP-003 is a polarity switch. This switch is used to ensure the pedal...

Answer this question

Answers are reviewed before publication.