How do I connect the Hiturbo S20 drone to the remote control?
To connect the Hiturbo S20 drone to the remote control, please follow these steps:
1. Ensure that both the drone and the remote control are fully charged.
2. Turn on the remote control by pressing and holding the power button until the LED lights up.
3. Turn on the drone by pressing the power button located on the side of the drone. The LED lights on the drone will start flashing.
4. On the remote control, push the left joystick (throttle stick) all the way up and then all the way down. This will initiate the pairing process.
5. Once the pairing process is initiated, the LED lights on the drone will stop flashing and remain solid, indicating a successful connection.
6. You can now control the drone using the remote control.
Please note that if the drone and remote control are not paired within a certain timeframe, they may need to be recharged and the pairing process should be repeated.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Hiturbo S20 drone.
Original question and details
I just received my Hiturbo S20 drone and I'm not sure how to connect it to the remote control. Can you provide step-by-step instructions on how to do this?
Answer this question
Answers are reviewed before publication.