How do I set the time on the ONXE EVN-006 LED USB Clock Fan?
I just received my ONXE EVN-006 LED USB Clock Fan and I'm not sure how to set the time on the LED clock. Can you provide step-by-step instructions?
Setting the time on the ONXE EVN-006 LED USB Clock Fan is a simple process. Here are the step-by-step instructions:
1. Make sure the fan is plugged into a USB power source and turned on.
2. Look for the "Set" button on the fan. It is usually located on the base or the side of the fan.
3. Press and hold the "Set" button for a few seconds until the LED display starts flashing or blinking.
4. Once the display is blinking, you can use the "Up" and "Down" buttons to adjust the hours and minutes.
5. Press the "Set" button again to confirm the hour setting and move to the minutes.
6. Use the "Up" and "Down" buttons to adjust the minutes.
7. Press the "Set" button again to confirm the time setting.
8. The LED display should stop blinking and show the updated time.
Please refer to the user manual for any specific instructions or variations in the button layout of your particular model.
Answer this question
Answers are reviewed before publication.