How do I connect the Formula FH-65B Bookshelf Surround Speaker to my amplifier?
To connect the Formula FH-65B Bookshelf Surround Speaker to your amplifier, follow these steps:
1. Make sure your amplifier is turned off throughout the procedure.
2. Choose a suitable speaker wire for your setup, considering factors such as amplifier type, wire distance, and budget.
3. Most speaker wires are polarity coded, with one conductor labeled (+) positive and the other (-) negative. On the back of your amplifier, each channel is likely labeled (+) and (-) and color-coded red for (+) positive and black for (-) negative.
4. The Formula FH-65B speaker terminals are color-coded as well, with red for (+) positive and black for (-) negative. Make sure to connect the corresponding terminals correctly, matching (+) to (+) and (-) to (-).
5. Ensure that all connections are tight and close-fitting. Check for frays or stray strands of wire touching both (+) and (-) terminals, as this can cause a short and potentially damage your equipment.
For more detailed instructions and illustrations, please refer to Figure 4 in the owner's manual.
Note: It is always recommended to consult your amplifier's owner's manual for specific instructions regarding speaker hook-up.
Answer this question
Answers are reviewed before publication.