How do I connect microphones to the TOA BG-2120 Mixer-Amp?
To connect microphones to the TOA BG-2120 Mixer-Amp, follow these steps:
1. Locate the microphone input terminals on the rear panel of the mixer-amp.
2. Use a suitable cable to connect the output of each microphone to the corresponding microphone input terminal. Ensure that the cable is securely connected.
3. If the microphones have XLR outputs, use XLR cables. If the microphones have 1/4" TRS or TS outputs, use the appropriate cables.
4. Make sure to match the impedance and sensitivity settings of the microphone inputs to the specifications of your microphones. This can be done using the gain controls on the front panel of the mixer-amp.
5. Adjust the microphone input volume controls to set the desired level for each microphone.
6. Test the microphones by speaking into them and monitoring the audio output from the mixer-amp.
Please refer to the TOA BG-2120 Mixer-Amp Operating Instruction manual for more detailed information and illustrations on connecting microphones and adjusting input settings.
Original question and details
I have multiple microphones that I want to connect to the TOA BG-2120 Mixer-Amp for a PA system. Can you provide instructions on how to properly connect the microphones to the mixer-amp?
Answer this question
Answers are reviewed before publication.