How do I clean the Artnaturals ANEA-0014 Oil Diffuser Sound Machine?

To clean the Artnaturals ANEA-0014 Oil Diffuser Sound Machine, follow these steps:

1. Regularly wipe down the exterior of the device with a soft cloth to remove any dust or residue.
2. To clean the water tank, first, ensure the device is turned off and unplugged.
3. Remove the water tank from the base by twisting it counterclockwise.
4. Empty any remaining water from the tank.
5. Fill the tank with a mixture of water and vinegar or rubbing alcohol. Use a ratio of 1:1.
6. Gently swirl the mixture in the tank to loosen any residue or buildup.
7. If there are any stubborn stains or deposits, use a soft brush or cotton swab dipped in the cleaning solution to scrub the affected areas.
8. Rinse the tank thoroughly with clean water to remove any cleaning solution residue.
9. Wipe the tank dry with a clean cloth or allow it to air dry completely before reattaching it to the base.
10. Once the tank is dry, reattach it to the base by twisting it clockwise until it is securely in place.
11. You can also clean the device's ultrasonic plate, which is located inside the water tank. Dip a cotton swab in vinegar or rubbing alcohol and gently wipe the plate to remove any mineral deposits.
12. It is recommended to clean the device at least once a week or more frequently if you notice any buildup or residue.

Note: Always refer to the user manual for specific cleaning instructions and precautions.