Questions asks 2026-09-19 12:08:35

How do I set the security code?

Read the related manualBrowse product Q&A

Accepted answer 2026-09-19 12:09:33
To set the security code on your VEVOR SS-775 Safe Box, follow these steps based on the type of password you wish to set:

Personal Password Setting:
  1. Open the safe door.
  2. Press the green Settings button located on the inside of the door. The buzzer will beep twice and the yellow light will turn on.
  3. Enter your new code (3 to 8 digits).
  4. Press the # or * key to confirm. The buzzer will beep twice and the yellow light will turn off, indicating the code is set.
Management Password Setting:
  1. Open the safe door.
  2. Press the 00 key on the keypad, then press the green Settings button. The buzzer will beep three times and the yellow light will turn on.
  3. Enter your new management code (3 to 8 digits).
  4. Press the # or * key to confirm. The buzzer will beep twice and the yellow light will turn off.
Note: The factory default password is 159. It is recommended not to set the personal password to be the same as the management code.
Original question and details

Come si imposta il codice di sicurezza?

Context

Asking about setting the security code for the VEVOR SS-775 Safe Box in Italian.

Answer this question

Answers are reviewed before publication.