User Manual Q&AAnswer
Dec 09, 2025 - 12:02 AM
1. **How do I start logging data with the Elitech LogEt 1 series data loggers?**
- **Answer:** You can start logging data by either pressing and holding the button for 5 seconds until the logger indicates it has started logging, or by setting it to auto-start mode where it begins logging once removed from the computer.
2. **How can I mark events while using the data logger?**
- **Answer:** To mark events, double-click the button to record the current temperature and time. You can mark up to 10 groups of data, and the LCD screen will display information about the marked data.
3. **What is the process for stopping data logging?**
- **Answer:** You can stop logging data by either pressing and holding the button for 5 seconds until the logger indicates it has stopped logging, or by setting it to auto-stop mode where it stops automatically when the memory reaches its maximum capacity.
4. **How do I download the data recorded by the data logger?**
- **Answer:** Connect the data logger to your computer via USB cable, wait for the indication on the LCD screen, and then download the data using the ElitechLog software. If the data does not auto-upload, you can manually download it from the software.
5. **How can I configure parameters for the data logger?**
- **Answer:** You can configure parameters by connecting the data logger to your computer, using the ElitechLog software to set preferred values, and saving the parameters to complete the configuration process.
6. **What should I be aware of regarding the LCD screen and LED indicators?**
- **Answer:** The LCD screen displays various information such as alarm status, operating status, logging interval, battery level, temperature, humidity, and more. The LED indicators provide visual cues for different functions of the data logger.
7. **Are there any warnings or recommendations for using the data loggers?**
- **Answer:** It is recommended to store the logger at room temperature, synchronize system time before usage, avoid exposure to certain chemical solvents for humidity accuracy, and not use the logger for long-distance transport if the battery level is low.
Add New Comment