User Manual Q&AAnswer
Nov 17, 2025 - 11:14 AM
To set up and synchronize the handheld microphone with the receiver in the smarteck BT-233 UHF Wireless Microphone System, follow these steps:
1. **Handheld Microphone Setup:**
- Turn on the power of the transmitter by pressing the power switch.
- The LCD on the microphone will light up and display the current channel and battery capacity.
2. **Receiver Setup:**
- Adjust the volume to the smallest setting before turning on the transmitter.
- Turn on the receiver. The LCD will light up and display the alphanumeric information.
- The LCD will display the channel and frequency of the receiver. Press the SET button to change the status.
3. **Synchronization Process:**
- When you want to change the channel or frequency, change the receiver first.
- Point the transmitter towards the infrared window on the receiver.
- Press the "SET" button on the transmitter. The frequency will synchronize with the receiver.
4. **Monitoring and Troubleshooting:**
- When the transmitter is off, observe the RF and AF levels on the receiver. If strong interference is detected, change the channel to avoid interference.
- Turn on the transmitter. The RF level meter will light up. Adjust the volume appropriately and speak into the microphone.
- The AF level meter on the receiver should light up when there is sound. If the meter does not light up, there may be an issue with the system that requires maintenance.
By following these steps, you can set up and synchronize the handheld microphone with the receiver in the smarteck BT-233 UHF Wireless Microphone System effectively, ensuring proper audio transmission and performance.
Add New Comment