Why is the receiver unit not turning on when attached to my tablet?
The receiver unit (RX) of the BOYA BY-V series does not have its own battery or a power button; it is device-powered, meaning it…
Manuals+ Q&A
Microphone System questions & answers
Browse answered questions about Microphone System, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
I have 4 speakers. The front ones are connected to the mixer normally with a cable. I would like to connect the front speakers to the rear speakers (distance about 10-12 m) with 2 MW-1 systems.
The LEKATO MW1 Wireless Microphone System is designed to convert a moving-coil microphone into a wireless one, connecting a microphone to a mixer or…
Why are my BOYA BY-W4 microphones blinking blue and not working correctly?
A constant blinking blue light on your BOYA BY-W4 indicates that the transmitter (TX) and receiver (RX) are unpaired (blinking slowly) or currently in…
Why does my R20 receiver not stay on after charging, and could the charging cable be the issue?
Based on the Gemini GMU Series manual, here are the troubleshooting steps and clarifications regarding your R20 Receiver's power issues: Charging Cable: Yes, the…
How to turn on the NUX B-10 Vlog-RX?
To turn on the NUX B-10 Vlog-RX receiver, push and hold the power button for 2.5 seconds. The OLED screen will illuminate, and the…
One of my eight microphones is not working. How can I troubleshoot this?
To troubleshoot a non-working microphone in your MicrocKing MK240-1 system, please try the following steps based on the manual's guidance: Check Power and Batteries:…
How do I enable or disable the mute function on the G-MARK M23 wireless microphone?
Based on the G-MARK M23-4 manual, the handheld microphone is equipped with a mute switch button. To toggle the mute status or ensure the…
What are the 16 specific MHz frequencies for the STRICH M2 UHF Wireless Microphone System?
The STRICH M2 UHF Wireless Microphone System operates within the frequency range of 500-980MHz. According to the technical parameters, the system features 16 adjustable…
How do I change the language on my Godox Virso Series receiver to English?
To change the language on your Godox Virso Series receiver to English, please follow these steps: Short press the Menu button to enter the…
How do I fix a pairing failure on the NUX B-3 Plus where the transmitter stays on channel 1 and the receiver blinks on channel 6?
The NUX B-3 Plus is designed to pair automatically upon power-up. If your units are failing to sync (indicated by the Receiver blinking on…
What is the difference between the BOYA BY-V1 and BY-V10 microphone systems?
The primary difference between the BOYA BY-V1 and the BOYA BY-V10 is the type of connector on the receiver, which determines which devices they…
How can I hear both my TV audio and the Debra X7 microphone system through my speakers simultaneously when my TV only has an optical output?
To hear both your TV audio and the microphones at the same time, you must use the Debra X7 receiver as a mixer. Since…
My Comica BoomX-U microphone's mute button automatically turns on, doesn't respond to long presses, and sometimes turns off only to re-engage. How can I fix this?
Based on the user manual for the COMICA BoomX-U, if you are experiencing an abnormal phenomenon such as the device crashing or being unable…
How do I reset the transmission frequency to factory settings on the KYXAIN MA5?
The KYXAIN MA5 manual does not specify a dedicated "factory reset" button for the frequency. However, you can manually cycle through the 16 available…
How do I turn off the mute function on the Phenyx Pro PTU-5200 transmitter?
On the Phenyx Pro PTU-5200 system, the MUTE status is typically managed by the ON/OFF/MUTE switch on the transmitter (handheld or bodypack). To resolve…
How do I pair the STRICH S3 transmitter and receiver if the RX light is blinking cyan?
Based on the STRICH S3 manual, a slowly flickering cyan light on the receiver (RX) indicates it is currently unconnected. To resolve this and…
Why is my BOYA BY-V4 microphone system not producing any sound or volume after working previously?
Based on the BOYA BY-V4 manual, if you are experiencing no sound or low volume, please check the following troubleshooting steps: Check Pairing: Ensure…
Where can I buy a replacement power adapter for the MicrocKing MK240-1 wireless microphone system?
To replace the power adapter for your MicrocKing MK240-1, you should look for a DC power supply that matches the specifications listed in the…
How do I connect and troubleshoot the BOYA BY-M1V series wireless microphone system with an iPhone 16 Pro Max, iPad Pro, and a laptop?
To connect your BOYA BY-M1V system to these devices, you must use the correct receiver and cable for each interface. Note that the iPhone…
How do I change the battery on the Jayete C-01?
The Jayete C-01 features a built-in 3.7V, 800mA lithium battery that is designed to be recharged rather than replaced by the user. If the…
How long does it take to recharge the receiver battery?
The manual for the MAC MAH W-UHF-100 does not specify the exact number of hours required for a full charge. However, it provides the…
Why is my BOYALINK microphone not detected by my Lenovo L460 laptop when using the 3.5mm jack?
If your Lenovo L460 is not detecting sound from the BOYALINK system via the 3.5mm jack, please check the following troubleshooting steps based on…
How can I replace a lost Transmitter B with a new Transmitter A in my Godox MoveLink M2 system?
In the Godox MoveLink system, the designations "A" and "B" are not fixed hardware identities but are assigned based on the pairing sequence and…
How do I fix the connection issue when the Saramonic Blink Go is flashing blue and red?
According to the Saramonic Blink Go manual, a flashing blue and red light on the transmitter (TX) indicates that the device is currently unpaired…