User Manual Q&AAnswer
Nov 02, 2025 - 09:02 AM
To update the firmware on your Silicon Power USB Flash Drive Dual Interface for iOS devices, follow these steps as outlined in the user manual:
1. **Backup Data:** Before proceeding with the firmware update, ensure you have backed up any important data stored on your SP xDrive Z50.
2. **Unzip Firmware Update Tool:** Unzip the xDrive_Z50_FW_Update_Tool.7z file and launch the tool on your PC.
3. **Initiate Update:** Click on the "Update" button first, then click "Start" in the popup window of the xDrive_Z50_FW_Update_Tool.
4. **Confirmation:** After approximately 1 second, a popup reminder will appear. Click "OK" to proceed.
5. **Firmware Update Process:** The xDrive_Z50 FW update tool will start running. It is crucial not to close any programs or remove the Z50 drive during the firmware update process.
6. **Completion:** Once the firmware update process is finished, a popup message will display "Update complete." Click "OK" to acknowledge the completion of the process.
By following these steps carefully, you can successfully update the firmware on your Silicon Power USB Flash Drive Dual Interface for iOS devices, specifically the SP xDrive Z50 model. Remember to always ensure a stable power source and avoid interruptions during the firmware update process to prevent any potential issues.
Add New Comment