Silicon Power Power USB Flash Drives Dual Interface iOS Devices Firmware
INTRODUCTION
Silicon Power USB Flash Drives Dual-Interface-iOS Devices Firmware updates the instruction
- Date: 2022/03/15
- Product: SP xDrive Z50
- Equipment: PC*1
- Operating system: Windows 7 or 10.
Please backup data before using xDrive Z50 FW update tool.
USING
- Step 1: Unzip xDrive_Z50_FW_Update_Tool.7z and launch the tool.
- Step 2: Please click “Update” first, then click “Start” in this popup window of xDrive_Z50_ FW_Update_Tool.
- Step 3: After 1 second, you can see the popup reminder like below and click “OK”.
- Step 4: After step 3, the xDrive_Z50 FW update tool will run. Please note that do NOT turn off any programs or remove Z50 drive while updating firmware.
- Step 5: The popup will display an “Update complete” message after the firmware update process is completed, then please click “OK” and the process is done.
X-XX-XXX-XX
Documents / Resources
 | Silicon Power Power USB Flash Drives Dual Interface iOS Devices Firmware [pdf] User Guide Power USB Flash Drives Dual Interface iOS Devices Firmware, Power USB, Flash Drives Dual Interface iOS Devices Firmware, iOS Devices Firmware |
