User Manual Q&AAnswer
Nov 02, 2025 - 08:35 AM
According to the unitech TS100 Presentation Barcode Scanner user guide, to change the operation mode from Printed-Reading Mode to Screen-Reading Mode, follow these steps:
1. **Access Configuration Mode:** To access the configuration mode, you need to scan the appropriate configuration barcodes. These barcodes contain commands that will change the settings of the scanner.
2. **Select Screen-Reading Mode:** Within the configuration barcodes, there should be a specific barcode that corresponds to changing the operation mode to Screen-Reading Mode. Look for the barcode that indicates the desired mode switch.
3. **Scan the Configuration Barcode:** Once you have identified the barcode that switches the operation mode to Screen-Reading Mode, scan it using the unitech TS100 Presentation Barcode Scanner. This action will send the command to the scanner to change its operation mode.
4. **Verification:** After scanning the configuration barcode, you can verify if the operation mode has successfully changed to Screen-Reading Mode by testing the scanner on barcodes displayed on a screen.
By following these steps and referring to the unitech TS100 Presentation Barcode Scanner user guide for the specific configuration barcodes, you can easily switch the operation mode to Screen-Reading Mode for improved performance when scanning digital barcodes.
Add New Comment