User Manual Q&AAnswer
Oct 10, 2025 - 02:46 PM
To connect your AIRMATE-USB mixer to your computer for live streaming or recording, follow these steps based on the information provided in the user manual:
1. **Setting Up the USB Modules:**
- Use a standard USB cable to connect the AIRMATE-USB mixer to your computer. The USB connector on the back panel of the mixer communicates with PCs to interface with music programs running on the computer.
- When connecting the AIRMATE-USB to your computer, the computer will recognize it as new hardware and establish a connection to any audio programs requiring audio hardware.
- No need to download drivers or perform complicated setup routines. Simply plug in the USB cable to your Windows or Mac computer and start tracking.
2. **Adjusting USB Module Settings:**
- The USB module allows for both pre-fader and post-fader signals to be sent to your PC. You can adjust this setting by moving jumpers on the USB module's PCB.
- You can also adjust the level sent to the USB chip in the AIRMATE-USB by using trimmers (VR1 and VR2) located on the USB module's PCB. These trimmers help adjust the outgoing level to your PC for left and right signals, pre or post master faders.
3. **Additional Information:**
- For more information on digital audio recording, you can explore software options like Kristal Audio Engine and Audacity, which are available for free download.
- To learn more about USB audio streaming, you can refer to resources like the Audio Stream Input/Output Wikipedia page.
- Ensure that your computer recognizes the AIRMATE-USB as a mic level signal, and adjust levels and balance as needed for optimal performance.
By following these steps and guidelines, you can successfully connect your AIRMATE-USB mixer to your computer for live streaming or recording purposes.
Add New Comment