User Manual Q&AAnswer
Aug 20, 2025 - 07:49 PM
To change the color or lighting effect of the RGB LED Strip using the remote control, follow these steps as outlined in the instruction manual:
1. **Turn on the LED backlight:** Push the ON button on the remote control to activate the LED strip.
2. **Select the desired color or lighting effect:** Use the corresponding buttons on the remote control to choose from the available options:
- White light (mixed color)
- Flash (7 light color change function)
- Strobe (slow fading out of a color)
- Fade (slow fading out with color change)
- Smooth (3 light color change)
- Control panel for color selection (12 mixed colors)
- Red, Green, Blue color
3. **Adjust brightness or speed:** You can increase or decrease the brightness or adjust the speed in flash, strobe, fade, or smooth mode using the buttons on the remote control.
4. **Set color intensity:** To set the desired color brightness, use the buttons to increase or decrease the intensity of the color.
5. **Turn off the LED backlight:** To turn off the LED backlight, press the OFF button on the remote control.
Remember that the color settings are mixed colors, so there may be minor deviations in color tints. Even the white light is a mixed color and not a purely white color tint.
Add New Comment