User Manual Q&AAnswer
Aug 13, 2025 - 07:21 PM
To set up your CHEMICAL GUYS ProFlow PM2000 Performance Electric Pressure Washer, follow these steps as outlined in the user manual:
1. Choose between Locking Casters for mobility or rubber foot pad for stationary use.
2. Attach a standard garden hose to the Brass Quick Connect coupled to the Ultra Clear Translucent Water Filter, threaded onto the backside of the ProFlow PM2000.
3. Use either the Standard or Compact Pressure Washer Barrel Length.
4. Attach the 20 ft long High-Pressure Hose to the water outlet on the front side of the ProFlow.
5. Connect the Pressure Washer Gun to the Rubber Hose using the quick connect on the underside of the gun.
6. Run the water source through the unit to bleed off trapped air.
7. Connect the ProFlow PM2000 to an electrical outlet.
8. Turn ON the machine.
Add New Comment