How do I install and set up the TECHNOLOG Cello 4S Data Logger? (TECHNOLOG Cello 4S Data Logger Instructions Manual)

Answer

manuals.plus

May 03, 2025 - 11:20 AM

To install and set up the TECHNOLOG Cello 4S Data Logger, follow these steps:

1. Ensure that you have received all the necessary components, including the data logger unit, battery pack, and any additional accessories mentioned in the product manual.

2. Before installation, make sure you have read and understood the safety guidelines provided in the product manual.

3. Choose a suitable location for the data logger. It can be used both indoors and outdoors, but ensure that it is protected from extreme temperatures and aggressive substances.

4. Install the battery pack provided by the manufacturer. Using any other battery pack may invalidate warranties.

5. If the unit has a tamper-evident label on the lid, only the manufacturer or their authorized agents should open the enclosure.

6. Connect any necessary input cables or sensors to the data logger according to the application requirements. Refer to the application notes and data sheets provided by TECHNOLOG for guidance on input connections.

7. If required, insert the SIM card into the data logger. Ensure that the SIM card is compatible with the integral mobile telecommunications modem module and the internal/external antenna. Contact TECHNOLOG or their authorized agents for further details.

8. Power on the data logger and follow the instructions in the product manual to configure the settings, such as logging intervals, communication options, and data storage.

9. If you need assistance with the installation or setup process, refer to the product manual provided by TECHNOLOG. It contains detailed instructions and troubleshooting tips.

Note: It is recommended to consult the product manual and follow the guidelines provided by TECHNOLOG for specific installation and setup instructions.