Certificate & EU Declaration of Conformity

2014/35/EU       – on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (recast).

2014/53/EU       – on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (‘RED’).

2G / 3G variants
República Argentina Comisión Nacional de Comunicaciones, contiene módulo CNC ID: H-24515

Malaysia “SIRIM QAS International” in-country certificate of conformity ‘E098519’ (certification of communications product) – standards SKMM WTS GSM-MT 1.01: 2007, SKMM WTS IMT-MT rev. 1.01: 2007

Republic of the Philippines ‘National Telecommunications Commission (NTC)’ in-country type approval certificate ‘ESD-CPE-2003596’ (customer premises equipment)

Socialist Republic of Vietnam “Ministry of Information and Communication” in- country VNTA type approval certificate C0337311219AA04A2 – complies with QCVN 12:2015/BTTTT; QCVN 15:2015/BTTTT

LTE (Cat M1 / NB1) / 2G variants
US Equipment Authorisation FCC ID: XUV2172TT2400

Essential Health & Safety Requirements

Use
If the equipment is likely to come into contact with aggressive substances, e.g. acidic liquids that may attack metals or solvents that may affect polymeric materials, then it is the responsibility of the user to take suitable precautions that prevent it from being adversely affected thus ensuring that the type of protection is not compromised. Examples of suitable precautions include regular checks as part of routine inspections or establishing from the materials data sheet that it is resistant to specific chemicals.

Special conditions for safe use
Use of any battery pack other than that supplied by the manufacturer for the application will invalidate applicable warranties.
Where the lid of the unit has a “Warranty void…” tamper evident label fitted then the enclosure may only be entered by the manufacturer or their authorised agents.

Maintenance (servicing and emergency repair);
It is recommended that routine periodic inspection of the equipment, in accordance with the applicable code(s) of practice, is carried out on a regular basis in order to ensure it is maintained in a satisfactory condition.

Be aware that where the enclosure is entered by anybody other than the manufacturer or their authorised agents then the integrity of the ingress protection seal cannot be guaranteed hence any warranties will be void.

Subject to the applicable code of practice, the enclosure may be temporarily opened and the internal battery pack replaced whilst the equipment is ‘live’. Use only a new battery pack, with a voltage not less than 3.6V, supplied by the manufacturer for the application.

Subject to the applicable code of practice, the enclosure may be temporarily opened and the ‘SIM’ card replaced whilst the equipment is ‘live’. Be aware that the SIM card network, generation and frequencies must be of a type that is supported by the integral mobile telecommunications modem module and the internal and / or external antenna. Contact Technolog, or their authorised agents, for further details.

Subject to the applicable code of practice, the enclosure may be temporarily opened and the internal antenna, where fitted, replaced whilst the equipment is ‘live’. Be aware that the operating frequency of the internal antenna must correspond with that of the integral mobile telecommunications modem module and the SIM card. Contact Technolog, or their authorised agents, for further details.
The equipment contains no other customer replaceable parts and is not intended to be repaired by the user. Repair of this equipment is only to be carried out by the manufacturer, or their approved agents, in accordance with the applicable code of practice.

Dismantling:
The unit contains a power source that should never be short circuited, punctured, dropped, crushed, deformed, exposed to high temperatures, incinerated, immersed or force discharged. Before dismantling the product, the battery manufacturer’s ‘Control of Substances Hazardous to Health (COSHH)’ information, available from Technolog, should be consulted.
Environmental considerations:

The product contains a battery pack that, in accordance with the requirements of the European Union’s ‘batteries’ directive listed in this document, must not be disposed of as unsorted municipal waste and collected separately in order to facilitate correct environmentally sound treatment and recycling. Within the European Union, where possible, the battery should be returned to the manufacturer, or their authorised agent, for disposal. Where this is not possible, prior to disposal your local waste disposal authority should be contacted regarding any regulations in force at the time covering waste disposal procedures in relation to lithium / thionyl chloride inorganic electrolyte batteries. Refer to the battery manufacturer’s ‘Control of

Substances Hazardous to Health (COSHH)’ information, available from Technolog, for further details of battery safe use and disposal guidelines.

Date: