User Manual Q&AAnswer
Apr 22, 2025 - 09:37 AM
There are two ways to match the SAGE LU MEI R1 10-Key RF Remote Controller with the LED controller.
1. Using the controller's Match key:
- To match: Short press the match key on the remote, then immediately press the on/off key (for a single zone remote) or zone key (for a multiple zone remote) on the remote. The LED indicator will fast flash a few times to indicate a successful match.
- To delete: Press and hold the match key for 5 seconds to delete all matches. The LED indicator will fast flash a few times to indicate that all matched remotes have been deleted.
2. Using Power Restart:
- To match: Switch off the power, then switch it on again, and repeat this process. Immediately short press the on/off key (for a single zone remote) or zone key (for a multiple zone remote) 3 times on the remote. The light will blink 3 times to indicate a successful match.
- To delete: Switch off the power, then switch it on again, and repeat this process. Immediately short press the on/off key (for a single zone remote) or zone key (for a multiple zone remote) 5 times on the remote. The light will blink 5 times to indicate that all matched remotes have been deleted.
Please note that these instructions are based on the SAGE LU MEI R1 10-Key RF Remote Controller Instruction Manual.
Add New Comment