How do I pair my Hercules Portable Bluetooth Speaker with my Bluetooth device?
I just purchased the Hercules Portable Bluetooth Speaker and I'm not sure how to connect it to my Bluetooth device. Can you provide step-by-step instructions on how to pair the speaker with my device?
To pair your Hercules Portable Bluetooth Speaker with your Bluetooth device, please follow these steps:
1. Turn on the speaker by pressing the On/Off button located on the front face of the speaker.
2. The Bluetooth pairing indicator light should start flashing quickly, indicating that the speaker is in pairing mode. If the light doesn't flash, please refer to section 3 in the instruction manual.
3. Open the Bluetooth settings on your device. For iOS devices, go to Settings > General > Bluetooth.
4. Activate the Bluetooth feature on your device and wait for the Hercules speaker to appear in the list of detected devices.
5. Locate the WAE-BTP02 speaker in the list and tap on it to connect to it.
6. After a short wait, the connection will be established, and the device should now appear as "Connected" in your device's Bluetooth settings.
Note: If your device requests a password, enter "0000" (four zeros).
Once the pairing is successful, you can start playing audio from your Bluetooth device, and the sound will be transmitted through the Hercules Portable Bluetooth Speaker.
If you encounter any issues during the pairing process, please refer to the troubleshooting section in the instruction manual or contact the Hercules technical support for further assistance.
Answer this question
Answers are reviewed before publication.