Q-TRAN VV1SW Linear Fixtures Corner And Surface
Product Information
Specifications
- Product: VEVETM-FLAT (01) STATIC WHITE
- Linear Fixtures: Corner & Surface
Product Usage Instructions
Installation
The VEVETM-FLAT (01) STATIC WHITE linear fixture is perfect for applications when the light needs to be flush in a corner. It is suitable for installation in the storage area of a clothes closet when specified with LEDs at 4.0 watts or less per foot per NEC regulations.
Lens Options
The VEVETM-FLAT (01) STATIC WHITE linear fixture offers four lens options:
- Diffused (DF)
- Polar (PR)
- Frosted (FR)
- Clear (CL)
For the representation of LED visibility, see the Diode Visibility section on the following pages. For beam angles, see the Photometric Performance section on the following pages.
Product Variants
The VEVETM-FLAT (01) STATIC WHITE linear fixture is available in the following variants:
- Product: VV1SW
- Watts/Ft: 1.5W/ft, 3.0W/ft, 4.0W/ft, 5.0W/ft, 1.5W/ft HE, 3.0W/ft HE, 6.0W/ft HE
- CCT (Correlated Color Temperature): 2000K, 2200K, 2400K, 2700K, 3000K, 3500K, 4000K
- Rated: DRY IP20
- Efficiency: STD Standard
- Wire Input/Connector/Connector/Output:
- Wire In: Bare Wire (Standard 24), Barrel Connector 6, Connector 24
- Wire Out: Closed-End (No feed), Bare Wire (Standard 24), Barrel Connector 6, Connector 24
- Wire Color: White (WH), Black (BK)
- Wire Type: CL2 Class 2, CL2P Plenum Rated
- Mounting: Stainless Steel Magnet, Low Profile Magnet
- Finish: Satin (ST), Black (BK), Bronze (BZ)
- Length (In): Fixture length minimum 12, maximum 98.43 not including end caps. Consult the factory for lengths under 12.
- Exact/Optimal: O Optimal Illumination, E Exact Specified Length
Sample Part Number:
VV1SW-3.0HE-30-DRY-STD-DF-P1-BW-BW-BK-CL2-SST-BK-48-E
FAQ
What are the available lens options for the VEVETM-FLAT (01) STATIC WHITE linear fixture?
The available lens options are Diffuse (DF), Polar (PR), Frosted (FR), and Clear (CL).
What is the maximum length of the fixture?
The maximum length of the fixture is 98.43 inches, not including end caps. For lengths under 12 inches, please consult the factory.
Can I request a custom wire length?
Yes, you can request a custom wire length by writing in the desired length next to “BW” (example: BW48).
What is the warranty for the VEVETM-FLAT (01) STATIC WHITE linear fixture?
The fixture comes with a 5-year warranty, which is only valid with Q-Tran power supplies. Field modifications will void the warranty.
Are there any specifications subject to change?
Yes, the specifications are subject to change. Please refer to the latest revision for the most up-to-date information.
Linear Fixtures – Corner & Surface
- Offers four lens options with a sleek flat profile
- Perfect for applications when the light needs to be flush in a corner
- Suitable for installation in the storage area of a clothes closet when specified with LEDs at 4.0 watts or less per foot per NEC regulations
Sample Part Number: VV1SW-3.0HE-30-DRY-STD-DF-P1-BW-BW-BK-CL2-SST-BK-48″-E
5-year warranty
Warranty only valid with Q-Tran power supplies | Field modifications void warranty | Data subject to change, all data has +/- 5% tolerance
PRODUCT DIMENSIONS
DELIVERED LUMENS
[Calculated L70 = 70000 hrs, L70 = 66000 hrs for HE, L70 = 55000 hrs for HE+] Tested with VV1SW-**-30-DRY-STD
DIODE VISIBILITY
- DF – Diffused lens
- PR – Polar lens
- FR – Frosted lens
- CL – Clear lens
PHOTOMETRIC PERFORMANCE
Nominal beam spread shown, beam spread varies based on the light engine. For more detailed information, see photometric data.
WIRE INPUT/OUTPUT
SINGLE
(Input only)
PASS THROUGH
(Input/Output)
CONFIGURATION OPTIONS
CONNECTOR/WIRE – IN/OUT
Connector/Wire In or Out not needed to specify the product. The standard configuration is BW for Wire In and CLS for Wire out
WIRE COLOR
MOUNTING
2 clips provided for 4′ or less; 4 clips provided for greater than 4′- To order separately use SST-01
- Each clip comes with a #4 x 5/8″ Flat Head SS
- One MG provided per foot
- To order separately use MG-01
- Sold separately, to order use MMA-01
- Each bracket comes with 2 #6 x 5/8″ Flat Head SS
- Required when mounting to a non-magnetic surface
- One M4 is provided per foot.
- To order separately use MG-04
EXACT/OPTIMAL FIXTURE LENGTH
EXAMPLES OF 12″ OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENS
S1
P1FINISH
SW DRY, DMP LENGTHS BY INCH
The exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult the factory for lengths under 12″.
EXACT LENGTH
OPTIMAL LENGTH
SW WET LENGTHS BY INCH
The exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult the factory for lengths under 12″.
EXACT LENGTH
OPTIMAL LENGTH
SW-HE, SW-HE+ DRY, DMP LENGTHS BY INCH
The exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult the factory for lengths under 12″.
EXACT LENGTH
OPTIMAL LENGTH: Highlighted rows are closest to the requested nominal length
COMPATIBLE POWER SUPPLIES
See power supplies cut sheets for more information. Data is subject to change, all data has +/- 5% tolerance.
|
DIM TO LEVEL |
INDOOR |
OUTDOOR |
||
|
SW24/1.5-4.0 |
SW24/5.0, SW-HE, SW-HE+ |
SW24/1.5-4.0 |
SW24/5.0, SW-HE, SW-HE+ |
|
|
Dim to Black |
Q6M-DC+CAP QTM-DC+CAP iQ-PH iQ-PH+QD1 |
Q6M-DC+CAP QTM-DC+CAP iQ-PH iQ-PH+QD1 |
QOM-DC+CAP QOM-PH iQ-PH |
QOM-DC+CAP QOM-PH iQ-PH |
|
0.1% |
QTM-eLED+0-10V QTM-eLED+AN QZ-DMX QZ-PH/0-10V QZ-STICK-PH/0-10V QZLP |
QTM-eLED+0-10V QTM-eLED+AN QZ-DMX QZ-PH/0-10V QZ-STICK-PH/0-10V QZLP |
Q-SET-QZ-DMX Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-DMX QZ-PH/0-10V |
Q-SET-QZ-DMX Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-DMX QZ-PH/0-10V |
|
1% |
QTM-eLED(E) QTM-eLED(L) QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN |
QTM-eLED(E) QTM-eLED(L) QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN |
QOM-eLED+DALI-DT6 |
QOM-eLED+DALI-DT6 |
|
10% |
Non-Dim Power Supply with SW App Dongle |
Non-Dim Power Supply with SW App Dongle |
Q-HEX-mini-DC Q-SET-mile |
|
|
Non-Dim |
QTM-eLED-ND QZ-ND |
QTM-eLED-ND QZ-ND |
Q-SET-QZ-ND Q-SET-eLED-ND QOM-eLED-ND QZ-ND iQ-ND-50-65 |
Q-SET-QZ-ND Q-SET-eLED-ND QOM-eLED-ND QZ-ND iQ-ND-50-65 |
|
Phase |
Q6M-DC+CAP QTM-DC+CAP QTM-eLED(E) QTM-eLED(L) QZ-PH/0-10V QZ-STICK-PH/0-10V QZLP iQ-PH iQ-PH+QD1 |
Q6M-DC+CAP QTM-DC+CAP QTM-eLED(E) QTM-eLED(L) QZ-PH/0-10V QZ-STICK-PH/0-10V QZLP iQ-PH iQ-PH+QD1 |
Q-HEX-mini-DC Q-SET-QZ-PH/0-10V Q-SET-mLED QOM-DC+CAP QOM-PH QZ-PH/0-10V iQ-PH |
Q-SET-QZ-PH/0-10V QOM-DC+CAP QOM-PH QZ-PH/0-10V iQ-PH |
|
0-10V |
QTM-eLED+0-10V QTM-eLED+AN QZ-PH/0-10V QZ-STICK-PH/0-10V QZLP |
QTM-eLED+0-10V QTM-eLED+AN QZ-PH/0-10V QZ-STICK-PH/0-10V QZLP |
Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-PH/0-10V |
Q-SET-QZ-PH/0-10V Q-SET-eLED+0-10V QOM-eLED+0-10V QZ-PH/0-10V |
|
Lutron Athena |
QTM-eLED+AN QTM-eLED+DALI-DT6-AN |
QTM-eLED+AN QTM-eLED+DALI-DT6-AN |
||
|
ECO System |
QTM-eLED(E) |
QTM-eLED(E) |
||
|
DMX |
QZ-DMX |
QZ-DMX |
Q-SET-QZ-DMX QZ-DMX |
Q-SET-QZ-DMX QZ-DMX |
|
DALI-2: DT6 |
QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN |
QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN |
QOM-eLED+DALI-DT6 |
QOM-eLED+DALI-DT6 |
|
SCENE App Dimmed |
Non-Dim Power Supply with SW App Dongle |
Non-Dim Power Supply with SW App Dongle |
COMPATIBLE MOUNTING ACCESSORIES
COMPATIBLE WIRING ACCESSORIES
COMPATIBLE CONTROL ACCESSORIES
© 2023 Q-Tran Inc. All rights reserved 155 Hill St. Milford, CT 06460 203-367-8777 sales@q-tran.com www.q-tran.com
Specification is subject to change. Rev-07-20-23
Documents / Resources
 |
Q-TRAN VV1SW Linear Fixtures Corner And Surface [pdf] Owner's Manual VV1SW Linear Fixtures Corner And Surface, VV1SW, Linear Fixtures Corner And Surface, Fixtures Corner And Surface, Corner And Surface, Surface |
