Q-TRAN EB3DW-3 Linear LED Lights
- Encapsulated with polyurethane for indoor and outdoor locations (IK10)
- Perfect for recess mounted installations
- Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments
- Delivers superior uniform light output and luminosity
Sample Part Number: EB3DW-3.0-24/30-ENC-STD-TL-P1-BW-BW-BK-CL2-SP-ST-48″-E
5 year warranty | Field modifications void warranty | Data subject to change, all data has +/- 5% tolerance | Compatible for use with Q-Tran power supplies | IK10 rated
Product Information
Specifications:
- Product Type: Linear Fixtures – Recessed
- Encapsulation: Polyurethane (IK10)
- Indoor/Outdoor Use: Yes
- LED Strips: High quality, encapsulated in a rigid extrusion
- Light Output: Superior uniform light output and luminosity
- Warranty: 5 years
Product Usage Instructions
Dimensions:
The product dimensions may vary based on the specific part number. Please refer to the product specifications for the exact dimensions.
Delivered Lumens:
The delivered lumens may vary based on the specific part number. Please refer to the product specifications for the exact delivered lumens.
[Calculated L70 = 40000 hrs]
Tested with EB3DW-**-30-ENC-STD
Diode Visibility:
The encapsulation of the product can be clear or translucent. The clear encapsulation provides better diode visibility compared to the translucent encapsulation. For more information on LED visibility, please refer to the Diode Visibility section in the user manual.
Wire Input/Output
The product supports two types of wire input/output configurations:
- SINGLE (Input only): This configuration allows for input wiring only. It is suitable for end feed installations.
- PASS THROUGH (Input/Output): This configuration allows for both input and output wiring. It is suitable for continuous mounting installations.
CONFIGURATION OPTIONS
CONNECTOR/WIRE – IN/OUT
Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out
WIRE COLOR
Mounting
The product supports two types of mounting options:
- Magnet: The product can be mounted using magnets.
- Spring Clip: The product can be mounted using spring clips.
MG
Magnet Clip
One MG provided per foot To order separately use MG-02
SP
Spring Clip
2 clips provided for 4′ or less. 4 clips provided for greater than 4′. To order separately use SP-01
MMA-02
Magnet Mount
Accessory for MG-02
Sold separately, to order use MMA-02 Each bracket comes with 2 #6 x 5/8″ Flat Head SS Required when mounting to a non-magnetic surface
Finish:
The product is available in a satin finish.
EXACT/OPTIMAL FIXTURE LENGTH
Length:
The length of the product can be specified as either exact or optimal:
- Exact: The product will be manufactured to the specified length.
- Optimal: The product will be manufactured to provide optimal illumination based on the specified length.
EXAMPLES OF 12″ OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENS
DW-HE ENC LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.
EXACT LENGTH
OPTIMAL LENGTH: highlighted rows are closest to requested nominal length
COMPATIBLE POWER SUPPLIES
See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.
| DIM TO LEVEL | INDOOR | OUTDOOR |
| DW-HE Tunable Applications | DW-HE Tunable Applications | |
| 0.1% | QTM-eLED+TW QTM-eLED+TW-AN QZ-DMX | Q-SET-QZ-DMX QOM-eLED+TW QZ-DMX |
| 1% | QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN QTM-eLED+DALI-DT8 QTM-eLED+DALI-DT8-AN | QOM-eLED+DALI-DT6 QOM-eLED+DALI-DT8 |
| 10% | Non-Dim Power Supply with TW App Dongle |
| 0-10V | QTM-eLED+TW QTM-eLED+TW-AN | QOM-eLED+TW |
| Lutron Athena | QTM-eLED+DALI-DT6-AN QTM-eLED+DALI-DT8-AN QTM-eLED+TW-AN | |
| DMX LED wattage must be doubled for DW-HE products |
QZ-DMX | Q-SET-QZ-DMX QZ-DMX |
| DALI-2: DT6 LED wattage must be doubled for DW-HE products |
QTM-eLED+DALI-DT6 QTM-eLED+DALI-DT6-AN | QOM-eLED+DALI-DT6 |
| DALI-2: DT8 LED wattage must be doubled for DW-HE products |
QTM-eLED+DALI-DT8 QTM-eLED+DALI-DT8-AN | QOM-eLED+DALI-DT8 |
| SCENE App Dimmed | Non-Dim Power Supply with TW App Dongle |
COMPATIBLE WIRING ACCESSORIES
COMPATIBLE CONTROL ACCESSORIES
FAQ
- Q: What is the warranty period for the product?
A: The product comes with a 5-year warranty. - Q: Can the product be used with Q-Tran power supplies?
A: Yes, the product is compatible for use with Q-Tran power supplies. - Q: What is the IP rating of the product?
A: The product is rated IP67, making it suitable for both indoor and outdoor locations. - Q: Can the product be modified in the field?
A: Field modifications will void the warranty of the product. It is recommended to use the product as specified. - Q: Are there any tolerance levels for the provided data?
A: All data provided has a +/- 5% tolerance level. - Q: Can the product be used in tunable applications?
A: Yes, the product is specifically designed for tunable applications.
© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777
- Email: sales@q-tran.com
- Website: www.q-tran.com
Documents / Resources
 |
Q-TRAN EB3DW-3 Linear LED Lights [pdf] Instructions EB3DW-3 Linear LED Lights, EB3DW-3, Linear LED Lights, LED Lights |
