Q-TRAN 03 RGB Lalo Encapsulated Owner's Manual

Perfect for surface mounted installations
Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments

Delivers superior uniform light output and luminosity

Product Usage Instructions

Dimensions

The product dimensions are not provided in the user manual.
Please refer to the manufacturer’s website or contact customer support for detailed dimensions.

Delivered Lumens
The user manual does not specify the delivered lumens for the product. Please refer to the manufacturer’s website or contact customer support for information on delivered lumens.

Diode Visibility
The diode visibility of the product depends on the encapsulation type:

ENC/CL: Clear encapsulation

ENC/TL: Translucent encapsulation

For representation of LED visibility, please refer to the Diode Visibility section on the following pages of the user manual.

Wire Input/Output
The product supports two types of wire input/output configurations:

SINGLE (Input only): Choose between S1 (Single 1 – End Feed) or S2 (Single 2 – Bottom Feed) for input wiring.

PASS THROUGH (Input/Output): Choose between P1 (Pass Through 1 – End Feed) or P2 (Pass Through 2 – Bottom Feed) for input/output wiring.

For continuous mounting, it is recommended to consider bottom feed configurations.

Connector/Wire In
The user manual provides the following options for connector/wire in:

BW: Bare Wire (Standard 24)

CON6: Connector 6
CON24: Connector 24

The typical selection is BW (Bare Wire). The standard length is 24, with a maximum length of 120. Custom lengths can be requested by writing the desired length next to BW in the part number (e.g., BW48).

Connector/Wire Out
The user manual provides the following options for connector/wire out:

CLS: Closed End (No feed)
BW: Bare Wire (Standard 24)

CON6: Connector 6
CON24: Connector 24

The typical selection is CLS or BW. The standard length is 24, with a maximum length of 120. Custom lengths can be requested by writing the desired length next to BW in the part number (e.g., BW48).

Input End Cap
The user manual provides the following options for the input end cap:

STD: Standard Clear
CL: Select CL for continuous runs

The input end cap matches the fixture finish chosen. For continuous runs, it is recommended to select CL.

Output End Cap
The user manual provides the following options for the output end cap:

STD: Standard Clear
CL: Select CL for continuous runs

The output end cap matches the fixture finish chosen. For continuous runs, it is recommended to select CL.

Wire Color
The user manual provides the following options for wire color:

WH: White
BK: Black

Wire Type
The user manual provides the following options for wire type:

CL2: Class 2
CL2P: Plenum Rated (CL2P only available with bare wire leads)

Mounting
The user manual provides the following options for mounting:

SST: Stainless Steel Magnet
MG: Low Profile Magnet
M4: M4 (mounting method not specified in the user manual)

Finish
The user manual provides the following options for finish:

ST: Satin
BK: Black

Length (in)
The user manual does not specify the exact/optimal length for the product. Please refer to the manufacturer’s website or contactcustomer support for information on length options.

Warranty
The product comes with a 5-year warranty. Please note that field modifications void the warranty. All data provided has a +/- 5% tolerance. The product is compatible for use with Q-Tran power supplies. It is IK10 rated.

FAQ (Frequently Asked Questions)

Q: Are the dimensions of the product provided in the user manual?
A: No, the user manual does not provide the dimensions of the product. Please refer to the manufacturer’s website or contact customer support for detailed dimensions.

Q: What is the delivered lumen output of the product?
A: The user manual does not specify the delivered lumens for the product. Please refer to the manufacturer’s website or contact customer support for information on delivered lumens.

Q: How can I determine the visibility of the LED diodes?
A: The diode visibility depends on the encapsulation type. For clear encapsulation (ENC/CL) and translucent encapsulation (ENC/TL), please refer to the Diode Visibility section on the following pages of the user manual.

Q: What are the available wire input/output configurations?
A: The product supports two types of wire input/output configurations: SINGLE (Input only) and PASS THROUGH (Input/Output). Please refer to the Wire Input/Output section in the user manual for more details.

Q: How should I select the connector/wire in and connector/wire out options?
A: The typical selection for connector/wire in is BW (Bare Wire). The standard length is 24, with a maximum length of 120. Custom lengths can be requested by writing the desired length next to BW in the part number. The typical selections for connector/wire out are CLS (Closed End) or BW (Bare Wire). Please refer to the Connector/Wire In and Connector/Wire Out sections in the user manual for more details.

Q: How should I choose the input and output end caps?
A: The input and output end caps should match the fixture finish chosen. For continuous runs, it is recommended to select CL (continuous run) for both input and output end caps. Please refer to the Input End Cap and Output End Cap sections in the user manual
for more details.

Q: What are the available wire color and wire type options?
A: The available wire color options are white (WH) and black (BK). The available wire type options are Class 2 (CL2) and Plenum Rated (CL2P, only available with bare wire leads). Please refer to the Wire Color and Wire Type sections in the user manual for more details.

Q: How should I mount the product?
A: The user manual provides three mounting options: Stainless Steel Magnet (SST), Low Profile Magnet (MG), and M4 (mounting method not specified). Please refer to the Mounting section in the user manual for more details.

Q: What finishes are available for the product?
A: The user manual provides two finish options: Satin (ST) and Black (BK). Please refer to the Finish section in the user manual for more details.

Q: Is the exact/optimal length of the product specified?
A: The user manual does not specify the exact/optimal length of the product. Please refer to the manufacturer’s website or contact customer support for information on length options.

Q: What is the warranty period for the product?
A: The product comes with a 5-year warranty. Please note that field modifications void the warranty. For more information, please refer to the Warranty section in the user manual.

Q: Is the product compatible with Q-Tran power supplies?
A: Yes, the product is compatible for use with Q-Tran power supplies. Please ensure to use compatible power supplies for optimal performance.

SPECIFICATION

Encapsulated with polyurethane for indoor and outdoor locations (IK10)
Perfect for surface mounted installations
Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments

Delivers superior uniform light output and luminosity

Sample Part Number: LL3RGB-6.0-RGB-ENC-STD-TL-P1-BW-BW-BK-CL2-SST-ST-48″-E

PRODUCT – DIMENSIONS

DELIVERED LUMENS

[Calculated L70 = 40000 hrs] Tested with LL3RGB-6.0-RGB-ENC-STD

DIODE VISIBILITY

WIRE INPUT/OUTPUT

CONFIGURATION OPTIONS

CONNECTOR/WIRE – IN/OUT

Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out

END CAP – IN/OUT

WIRE COLOR

MOUNTING

SST
Stainless Steel Clip

2 clips provided for 4′ or less; 4 clips provided for greater than 4′
To order separately use SST-01
Each clip comes with a #4 x 5/8″ Flat Head screw

MG
Magnet Clip
One MG provided per foot To order separately use MG-01

MMA-1
Magnet Mount
Accessory of MG-01
Sold separately, to order use MMA-01
Each bracket comes with 2 #6 × 5/8″ Flat Head SS
Required when mounting to a non-magnetic surface

M4
Low Profile Magnet
One M4 provided per foot.
To order separately use MG-04

FINISH

EXACT/OPTIMAL FIXTURE LENGTH

EXAMPLES OF 12* OPTIMIZED STATIC WHITE FIXTURES WITH DIFFUSED LENS

RGB ENC LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

COMPATIBLE POWER SUPPLIES
See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.

DIM TO LEVEL	INDOOR	OUTDOOR
DIM TO LEVEL	RGB	RGB
0.1%	QTM-eLED+DMX QZ-DMX	Q-SET-QZ-DMX QOM-eLED+DMX QZ-DMX
1%	QTM-eLED+DALI-DT8	QOM-eLED+DALI-DT8
10%	Non-Dim Power Supply with RGB App Dongle

DIMMING PROTOCOL	INDOOR	OUTDOOR
DIMMING PROTOCOL	RGB	RGB
DMX	QTM-eLED+DMX QZ-DMX	Q-SET-QZ-DMX QOM-eLED+DMX QZ-DMX
DALI-2: DT8	QTM-eLED+DALI-DT8	QOM-eLED+DALI-DT8
SCENE App Dimmed	Non-Dim Power Supply with RGB App Dongle

COMPATIBLE MOUNTING ACCESSORIES

COMPATIBLE WIRING ACCESSORIES

COMPATIBLE CONTROL ACCESSORIES

5 year warranty
Field modifications void warranty
Data subject to change, all data has +/- 5% tolerance
Compatible for use with Q-Tran power supplies
IK10 rated

Documents / Resources

Q-TRAN 03 RGB Lalo Encapsulated [pdf] Owner's Manual
03 RGB Lalo Encapsulated, 03 RGB, Lalo Encapsulated, Encapsulated

References

User Manual

Q-TRAN 03 RGB Lalo Encapsulated

Product Information