Q-SYS NC Series Camera,NV-21,Core 8 Flex Processor
Product Specifications:
- Standard CAT-5/6 connectivity
- USB 2.0 or higher compatibility
- HDMI input
- Mic/line input
- Loudspeaker output
- Supports up to 4 zones (Zone 1, Zone 2, Zone 3, Zone 4)
- Q-SYS NV-21 compatible (set as encoder or decoder)
- Zoom Rooms Controller integration
- Network Gooseneck Microphones support
- Remote Monitoring and Management capabilities
Product Usage Instructions:
Connection Setup:
- Connect the camera using a standard CAT-5/6 cable.
- Ensure USB 2.0 or higher connection for data transfer.
- Connect HDMI cable for video input.
- Plug in Mic/line input for audio.
- Connect the loudspeaker output for audio playback.
Zone Configuration:
The product supports up to 4 zones. Configure each zone according to your setup requirements.
Q-SYS NV-21 Integration:
Set the Q-SYS NV-21 as either an encoder or decoder based on your network needs.
Zoom Rooms Controller:
Integrate the product with Zoom Rooms Controller for enhanced control and functionality.
Remote Monitoring and Management:
Utilize the remote monitoring and management features for convenient control and maintenance.
Frequently Asked Questions (FAQ):
Q: Can the product work with Network Gooseneck Microphones?
A: Yes, the product supports Network Gooseneck Microphones for enhanced audio capabilities.
Q: How many zones are supported by the product?
A: The product supports up to 4 zones (Zone 1, Zone 2, Zone 3, Zone 4) for versatile usage scenarios.
Documents / Resources
 |
Q-SYS NC Series Camera,NV-21,Core 8 Flex Processor [pdf] Installation Guide NC Series Camera Core 8 Flex Processor, NC Series, Camera Core 8 Flex Processor, 8 Flex Processor, Processor |
