Pytes E-Box 48100R Solar Storage System
Connect Power Cable & Ground Cable
Warning: Ensure that the battery power switch is off
Note: Each battery should be connected to a Bus Bar when installing multiple batteries.
Connect Communication Cable
Note: Select CAN or RS485 port based on the communication type of inverter
Note: Please connect the master battery and the inverter.
Note: Ensure the pin order of communication cable is correct.
Set the DIP Switch
Note: Set the DIP switch based on the inverter you installed.
Start up the System
Note: Make sure the connection to the inverter is correct before starting the battery.
Documents / Resources
 |
Pytes E-Box 48100R Solar Storage System [pdf] Installation Guide E-Box 48100R Solar Storage System, E-Box 48100R, E-Box, 48100R, 48100R Solar Storage System, Solar Storage System, Solar Storage, Storage System |
 |
Pytes E-BOX-48100R Solar Storage System [pdf] Installation Guide E-BOX-48100R Solar Storage System, E-BOX-48100R, Solar Storage System, Storage System |
