PYS Illuminate 4c Compact Center Channel Speaker User Guide

Refer to the speaker assembly manual for step-by-step
instructions on how to put the components together.
Make sure to follow the wiring diagram carefully to ensure
proper connections.

Use the provided epoxy glue for secure attachment of
components.
Secure the parts using the Cap Head Screws and Threaded
Inserts.

Complete the assembly by connecting the Binding Posts as per
the manual.

Frequently Asked Questions (FAQ):

Q: Where can I find additional support or troubleshooting
help?

A: For any technical support or troubleshooting assistance,
please visit our website at www.printyourspeakers.com/support or
contact our customer service team at
support@printyourspeakers.com.

Q: Can I customize the components in my speaker setup?

A: While we recommend using the specified components for optimal
performance, you can experiment with different components to
achieve your desired audio output. However, please note that this
may impact the overall performance of your speaker.

Q: How do I clean and maintain my custom speakers?

A: To clean your custom speakers, use a soft, dry cloth to
gently wipe off any dust or debris. Avoid using any harsh chemicals
or abrasive materials that may damage the components. Regular
maintenance includes checking for loose connections and ensuring
all components are functioning properly.

“`

View Fullscreen

V1.0
Illuminate 4c Parts & Purchase
Guide
www.print yourspeakers.com

V1.0
YOUR DIY SPEAKER SHOPPING GUIDE

Alright, sound crafters! Below is your treasure map to all the parts you’ll need for your custom speaker. We’ve sorted everything by where you can buy them to make your shopping trip a breeze. Remember, picking the right parts will amp up your audio experience!

QTY PER SPEAKER
1 2
1 pair
1 1 1 1 1 1 1 1 2
24

COMPONENT
Dayton RST28F-4 (Truncated) Dayton RS100P-4 Binding Posts
(Dayton BPA- 38G suggested) 0.1mH Inductor 0.2mH Inductor 1.4mH Inductor
0.51 Ohm Resistor 4.3 Ohm Resistor 7 Ohm Resistor 4.0uF Capacitor
15uF Capacitor 20uF Capacitor CNC Kitchen m4 Threaded Inserts

M4 10mm Cap Head Screws

~5ml

Epoxy Glue

Cable Ties (small, <5mm wide)

1-2 sticks

Hot Glue

20g

Solder

100cm

Speaker wire

250x500mm

Dacron Sheet

~1900g 10g

PLA Printer Filament
TPU Printer Filament for feet (alternatively you can purchase rubber feet)

PRODUCT CODE WHERE TO GET IT EU, US, AU

RST28F-4 (Truncated) RS100P-4
BPA-38G
AC20-10 AC20-20 AC201-4 DNR-0.51 DNR-4.3 DNR-7.0 DMPC-4.0 DMPC-15 DMPC-20
M4x8.1

US, EU+EU, AU US, EU, AU
US, EU, AU
US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU
World Wide
Local Hardware Store, Speaker Component Store, Amazon (Search: M4 10mm socket head cap screw)
Local Hardware Store, Speaker Component Store, Amazon
Local Hardware Store, Speaker Component Store, Amazon
Local Hardware Store, Speake Component Store, Amazon
Local Electronics Store, Speaker Component Store, Amazon
Local Electronics Store, Speaker Component Store, Amazon
Local Sewing/Craft Store, Amazon, eBay
Any 3D printing store

Any 3D printing store

www.print yourspeakers.com

V1.0
Link not working? Item out of stock?
No worries! Just shoot us an email at help@printyourspeakers.com, and we’ll update the guide and help you find what you need.

www.print yourspeakers.com

Documents / Resources

PYS Illuminate 4c Compact Center Channel Speaker [pdf] User Guide
RST28F-4, RS100P-4, BPA-38G, etc., Illuminate 4c Compact Center Channel Speaker, Compact Center Channel Speaker, Center Channel Speaker, Channel Speaker, Speaker

References

User Manual

PYS Illuminate 4c Compact Center Channel Speaker User Guide

Illuminate 4c Compact Center Channel Speaker

Product Information

Specifications:

Product Usage Instructions:

Parts List:

Assembly Instructions: