Pylex 12085 Swing Bracket Kit
Product Specifications
- Material: Not specified
- Kit Contents: Includes all screws and bolts
- Size: Not specified
- Weight: Not specified
Assembly Steps:
- Identify the parts included in the kit.
- Refer to the provided manual to understand the quantity and sizes of holes for each part.
- Start by assembling Part 1 using the 1/4-inch holes A, B, and C as indicated in the manual.
- Proceed to Part 2 using the 1/4-inch holes C, D, and E.
- Use the appropriate screws and bolts to secure the parts together.
- For larger applications, consider using an extra kit as recommended in the manual.
Frequently Asked Questions (FAQ):
Q: Are all screws and bolts included in the kit?
A: Yes, all necessary screws and bolts are included for assembly.
Swing bracket kit
MAXIMUM LOAD :
Up to 6 feet wide with a set
For larger application, please use an extra kit.
For example, it is possible to build two 8′ to 10′ swings using three kits total.
Documents / Resources
 |
Pylex 12085 Swing Bracket Kit [pdf] User Guide 12085 Swing Bracket Kit, 12085, Swing Bracket Kit, Bracket Kit, Kit |