Pyle Wireless Bluetooth Home Audio Amplifier – 90W Dual Channel
Introduction
The Pyle dual channel audio amplifier boosts your PA or entertainment system and provides low distortion audio reproduction. support for speakers with 4 to 8 Ohms You can listen to high-quality audio thanks to impedance. The compact integrated professional indoor stereo receiver has Bluetooth wireless music streaming capabilities. It is compatible with the newest technology available today, including smartphones, tablets, laptops, and computers. It has a hassle-free receiver pairing feature, Bluetooth, and an aux/MP3 switch button that lets you choose whatever input you want to utilize. To use Bluetooth-enabled devices, fully depress the button; to utilize aux/MP3 devices, fully release the button.
Several external devices are supported by a professional class-T amp. To enjoy the acoustically enhanced sound with the speaker, connect an Android phone, iPhone, iPod, or MP3 to the 3. 5mm jack input. There are also RCA, aux, and mic inputs. With sharp buttons and rotary knob controls for audio adjustment, this multipurpose portable 2-channel tiny home theatre digital stereo receiver box is easy to use. Additionally, a blue LED volume knob that doubles as a power indicator is present.
The amplifier uses a Class- T audio amplifier IC for low distortion and acoustically accurate reproduction of music. And Bluetooth wireless music streaming ability makes it working with virtually any Bluetooth-compatible devices like iPhone, Android, Smartphones, Tablet, MP3 players, TV, PC, etc.
Over-voltage protection circuit shuts down the amplifier if the input voltage exceeds 14. 4V DC.
FEATURES
- Compact and Powerful Mini Amp System
- Built-in Bluetooth for Wireless Audio Streaming
- Compatible with All Your Favorite Bluetooth Devices
- (Works with iPhone, Android, Smartphone, iPad, Tablet, PC, etc.)
- 1/4” Microphone Input Connector Jack
- Aux (3.5mm) iPod/MP3 Input Connector Jack
- RCA (L/R) Audio Input Connector Jacks
- Four Push Type Speaker Terminals
- Rotary Treble, Bass, Master Volume Adjustable Controls
- Short Cut, Overload & Overheat Protection
- Source Input Selection Includes Power Adapter
BLUETOOTH CONNECTIVITY
- Instant Bluetooth Wireless Streaming Ability
- Works with All of Your Favorite Devices
- (iPhone, Android, Smartphone, iPad, Tablet, MP3 Player, etc.)
- Bluetooth Version: 4.0
- Bluetooth Wireless Range: 30’+ Feet
TECHNICAL SPECS
- MAX POWER OUTPUT: 90-Watt Output
- RMS POWER OUTPUT: 45-Watt x 2 @ 4Ohm
- FREQUENCY RESPONSE: 20Hz-20kHz
- SPEAKER IMPEDANCE: 4-8Ω Class-T Circuit Design
- RATE LEVEL MIC INPUT: 8mv/600 Ω
- TONE CONTROL (BASS): +/- 8dB
- TONE CONTROL (TREBLE): +/- 8dB
- SIGNAL TO NOISE RATIO: >80dB
- TOTAL HARMONIC DISTORTION: <0.4%
- INPUT POWER: DC 9 ~ 14.4V, 2A 12V AC/DC Adapter
- DIMENSIONS (L X W X H): 6.0” x 4.6” x 1.6”
BLUETOOTH OPERATION INSTRUCTION
External devices which have a built-in Bluetooth feature can be connected to this amplifier wirelessly to play through the amplifier’s speakers. If your amp is connected to speakers, you will hear audible tones which will help for connecting.
- At first be sure that the amplifier is powered on, and turn the volume to low. Please remember to connect the Bluetooth Antenna at the back panel for better receiving signal.
- Press the BT/Line button switch in on the front panel, you will hear the voice “POWER ON” and also “PAIRING”, and then the unit is automatically ready to pair with your external device.
- Turn on the Bluetooth of your external device.
- Search for available Bluetooth devices and make sure to be within range of your amp, and wait for your device to select “BT-RY” on the pairing devices lists of Bluetooth networks.
- Once connecting you will hear a voice say, “Your Device is Connected”, then the Bluetooth pairing is successful and you have established a Bluetooth connection.
- You can now play music on your external device through the amplifier.
POWER On /Off
- BLUETOOTH Indicator
- Master Volume Control
- Bass And Treble Tone Control
- Bluetooth/ AUX- MP3
- Input Button Switch
- Line AUX/MP3 Input
- Aux RCA Stereo Input
- 1/4″ MIC Input Jack
- Push Type Speaker L/ R Terminals
- DC12V Input
- Bluetooth Antenna
This multipurpose digital Hi-Fi audio amplifier packs a punch. It can be used in your car or home and don’t be fooled by the size, it’ll give your entertainment system a serious boost. The state-of-the-art design uses surface mount components and advanced engineering for proven performance, reduced signal interference, and long operational life. This unit will ensure low distortion and acoustically accurate reproduction of audio. The PFA330BT, 90- watt class-T circuit-designed amp will turn it up to the next level.
PLUG IT IN
Connect your iPod/MP3 player to the 3.5mm input jack! This unit also has a microphone and audio input jacks. (iPod & MIC not included)
PARTY MACHINE
Create a karaoke session and let the fun begin. Use the MIC and aux inputs to add life to the party. You will be in control of the music and then you can configure the audio just the way you want it to sound.
Frequently Asked Questions
You may stream your music directly through your Bluetooth amplifiers thanks to built-in Bluetooth connectivity in current amplifiers. This does away with the requirement for expensive speaker equipment. Simply pair them with a Bluetooth-enabled device, such as your laptop, smartphone, tablet, or another electronic device.
You can listen to online music via many internet services, audio files shared over the local network, and music played directly on iOS and Android smartphones and tablets with WIFI and Bluetooth-connected amplifiers.
The speaker may need to be unpaired, then repaired with your device. Before starting the connecting process, make sure the Bluetooth Speaker is ON.
Bluetooth uses short-range radio waves in the frequency range of 2.400 to 2.485 GHz to transfer digital data. This information is the digital audio signal from a coupled device in the case of Bluetooth speakers. Bluetooth transmits data using 79 different frequencies between 2.400 and 2.485 GHz.
The purpose of audio amplifiers is to faithfully, effectively, and with little distortion replicate input audio signals at sound-producing output elements at appropriate volume and power levels.
Since the power for the drivers is supplied internally by the headphones, Bluetooth headphones will never require an amplifier.
Typically, no. Only active speakers with an integrated amplifier can be connected directly to a television. For instance, since the majority of soundbars are active, you can use optical or HDMI ARC to connect them directly to a TV.
A Bluetooth transmitter is all that is required. Once you have a transmitter, attach it to your TV’s audio output. The kind of transmitter you select may require a power source. The transmitter and your Bluetooth speakers must then be paired.
You can start a Bluetooth connection to your TV right away if you have prepared devices that support it. The numerous audio output choices that your TV provides are another crucial point to remember. You’ll most likely be using a 3.5mm AUX, RCA, or optical audio output if it lacks built-in Bluetooth.
To the TV’s Audio Output jack, attach a Coaxial Digital Cable, an Optical Digital Cable, or an audio cable. The opposite end of the wire should be connected to the A/V receiver or home theatre system’s matching jacks. The audio input may have the designations TV INPUT or VIDEO INPUT, depending on your device.
Video
