Pyle Vintage Bluetooth Speaker, Leather Portable Wireless Retro Style Speaker-User Instructions

The portable wireless Bluetooth streaming speaker has a 2″ tweeter and a 5.25″ subwoofer with a maximum power of 180 watts. Additionally, the portable speaker contains an FM radio with a digital LED display and a microphone priority feature. This retro-style speaker system is Bluetooth 5.0 compatible, contains a USB flash drive and micro SD card reader that can be used as an MP3 player, a 3.5mm AUX IN jack, and a 6.5mm microphone input. includes a power adapter and a remote control

The Bluetooth speaker has TWS functionality. TWS MULTI SPEAKER LINK L R stereo sound may be achieved by connecting many speakers. The speaker enables interior streaming and doubles as an outside speaker for events like parties.

The powerful Bluetooth wireless loudspeaker contains dials for the bass and treble, as well as a 14″ microphone input with echo control. You may use our little Bluetooth speakers to sing by plugging your microphone into the mic port. The 7.4V, 4400mAh rechargeable battery within these Pyle Bluetooth wireless speakers is totally portable and has a charging time of around 5 hours. equipped with an LED light to indicate the battery level. either inside or outside

The illegal operation may cause personal injury, which could be fatal. The illegal operation may cause damage to property.

Important Safety Instructions:

Read these instructions carefully.

Read all warnings
Follow all instructions.

Please do not expose this apparatus to water, corrosive liquid or gas. Store the apparatus in a dry and clean place.
DO NOT install the speaker system near windows, or any heat sources such as radiators, heat registers, gas stoves or other apparatus that produce heat.

DO NOT place any naked flame sources, such as lit candles, on or near the apparatus.
Clean only with dry cloth.

DO NOT place objects filled with any kind of liquid on the speakers
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Liquids can cause a failure and/or fire hazard.

DO NOT insert metal bar/wire or any other object in the speaker hole.
Protect the power cord from being walked on or pinched particularly at plugs, and the point where they exit from the apparatus.

To reduce the risk of electric shock, DO NOT handle the plug with wet hands.
Before moving the speakers, please pull out the power adapter and disconnect from any other equipment.

DO NOT block any ventilation openings of the device, otherwise it will cause a rise in internal temperature of the apparatus and thus cause damage to the circuit.
DO NOT press the switches or other keys with force.

Unplug the power cable immediately if your device emits smoke or acts abnormally. Seek professional help from your nearest service center.
Only use attachments recommended by the manufacturer. Use of other attachments may be hazardous.
DO NOT throw used batteries in with your household rubbish. Follow instructions from your local council about safe disposal.

Using the Remote Control

Installing the Batteries

Remove the battery cover from the back of the Remote Control as shown and insert 2xAAA size batteries ensuring correct polarity.

Mute
Fm radio
0-9 keys
Repeat
Tws
Play/pause
Previous song
VoIume+
Next song
Volume-
Record key
Mic Priority

Record play
Mic vol-
Mic voI+

Wireless BT
Bass+
Bass-

Aux
Echo+
Echo-

USB
TrebIe+
Treble

Note for remote: The remote control should be used within 6m from the device, around 30 degree on the left/right side, pointed directly towards the speaker system

Overview

POWER
MIC INPUT
AUX INPUT

USB INPUT
DISPLAY
MICRO SD INPUT

CHARGE INDICATOR
DC INPUT
VOLUME

BASS
TREBLE
MODE/TWS

REPEAT
MIC PRIORITY
NEXT SONG/FM+

PLAY/PAUSE/IN FM MODE,

SHORT PRESS TO SEARCH RADIO STATION

PREVIOUS SONG/FM-

IR REMOTE RECEIVER
ECHO
MIC VOL

CONNECTING WIRED MICROPHONE (microphone not supplied)

Connect the microphone to MIC IN input and switch on.

Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.

Voiceover Function

The voiceover function is available with any input.
Play a track through AUX/USB/MICRO SD/FM/Wireless BT; connect a microphone to MIC IN and sing along for a “karaoke’s effect

Built-in Recording Function:

USB Drive or Micro SD card must have a Song or Songs (MP3, WMA, or FLAC ‑les) saved before trying to record.
Turn ON the unit then insert the USB or Micro SD into the proper slot.

Note: Micro SD card should be inserted with gold connection strips facing front of Portable Speaker.

Wait for first song on USB or Micro SD to start playing, then plug in Microphone and test the Microphone if working. Adjust Volume and Echo.
Short press REC on the Remote to start recording.
When finished recording Press REC on the Remote to save the recording.

Press REP to play recording.

Note: When recording the first time a folder will be created on the USB Drive or Micro SD card named AB_REC.

USB/MICRO SD

Keep the speaker away from high temperatures, high magnetic ‑eld and high frequency interference If the speaker hangs, please switch it oand switch on again, or unplug USB/MICRO SD card and re-plug. The speaker will work normally again. The maximum size of USB/micro SD device that can be connected is 64GB.

MUSIC FORMAT SUPPORT MP3, WMA, FLAC

USB port, plug and play.
MICRO SD slot. Plug and play.
Mode key: Choose input source from these options: AUX/USB/MICRO SD/FM/Wireless BT.

Play/pause key: when playing, press this key to pause, press the key again to play.
Previous/Next key: when playing, single press of this key will play next/ previous song as per your wish.
Repeat key: when playing, pressing this key can replay the current song or all songs as per your wish. Press once for single repeat; Press twice for repeat all.

FM RADIO FUNCTION

Turn ON the unit and press repeatedly the MODE key on unit, or the FM on remote control and select FM function (the display will show the frequency).
Press the PLAY button on the unit or the key on remote control to activate the auto memory (the radio starts an automatic search for available radio stations and saves them automatically).
The station’s number stored depends on the radio signal in your area. During the search, press PLAY button on the remote control to stop searching.
Use the NEXT and PREV, or the keys and on the remote control to listen to the various radio stations saved in memory.

To change to a preset station, use the number keys on the remote control. For example, to call up the station number 12, first press 1 and then 2.

WIRELESS BT STREAMING

Built-in BT for Wireless Music Streaming
Simple & Hassle-Free Pairing

Works with All of Today’s Latest Devices Smartphones, Tablets, Laptops, Computers, etc.
BT Version: 5.0
BT Network Name: ‘PYLEUSA’

Wireless Range: Up to 32’ ft.

WIRELESS BT OPERATION

Turn ON the machine and press the MODE on unit, or the BT on remote control to select the BT function, the display shows “BLUE”.
In the BT mode, the system automatically enters search mode.

Activate the Wireless BT feature on the external device to be coupled.
Initiate a search for devices. The device shows up as “PYLEUSA”.
Press the PLAY button on the unit or the key on remote control, to start playing and the buttons NEXT and PREV, or the keys and for the selection of songs.

CHARGING INSTRUCTIONS

This speaker has a high capacity 7.4V battery. Please connect to AC port with the power adapter to charge. The speaker has an indicator light that will illuminate when the speaker is on charge. When the speaker is fully charged, the indicator light will off. It takes around 6 -8 hours to fully charge the speakers. Disconnect power adapter as soon as battery is fully charged.
Note: Over charging will damage the battery.
Please fully charge the speakers if they are not used in a long time. Please charge the speakers every 2 months, otherwise the battery may get damaged.

Note: When the battery of the speaker is low, please charge it within 48 hours.

TWS FUNCTION

For increase sound select, our unit provides TWS function as follows:

Step-1: Make sure two same units are in BT mode.

Step-2: Turn ON BT mode on your device and connect one of the units.
Step-3: Press and hold the TWS button on each unit, and two units will pair automatically.

Remark: After two units pairing, press and hold TWS button again to quit pairing.

WHAT’S IN THE BOX:

Speaker System
Remote Control
Power Adapter

TROUBLESHOOTING

Users may try to solve common problems by following these guidelines. If the problem persists and can’t be solved, please contact Customer Service for assistance.

Symptom	May caused by	Solution
No sound when powered ON	1. No input sound source 2. Volume knob is in the lowest position 3. Voice switch OFF 4. USB/MICRO SD card not plugged	1. Input AUX signal 2. Adjust volume 3. Turn on voice switch 4. Plug USB/MICRO SD card, pIay MP3
Sound Distortion	1. Volume is too loud 2. Audio file error	1. Turn the volume down 2. Check and change the audio file
No sound comes from the Microphone	1. Microphone socket may not be plugged properly. 2. Microphone switch may not be on 3. Microphone volume is on lowest mode.	1. Ensure the microphone is correctly plugged into the socket. 2. Turn on the microphone 3. Adjust the microphone volume as per users wish
No sound comes after inserting USB/ MICRO SD card	1. Incorrect file format 2. USB/MICRO SD card may not be plugged in properly.	1. File format should be MP3 2. Plug USB/MICRO SD card correctly
Charging indication – red light flashing when there is low charge	Charging adapter is not inserted properly.	It will not affect the speaker system. The light is only used for indicating whether the unit is charging.
Unable to charge or the battery works only for short duration	1. Connect power cord to charge 2. Battery not fully charged 3. Battery life may have ended	1. Check if the power cord is connected properly 2. Extend charging time; normaIIy it takes 6-8 hour to fully charge 3. Replace old batteries with the same specification as the old batteries.
Speaker makes loud noises	1. Mic switched ON but too close to the speaker 2. Microphone switched ON but is not being used. 3. Microphone volume is too loud 4. Mobile phone is too close to the speaker 5. Other wireless equipments may is placed very close to the speaker.	1. Keep the mic 2 meters away from the speaker 2. Turn off mic if not in use. 3. Adjust microphone volume to lower mode 4. Keep mobile away from the speaker whilst attending a call. 5. Keep speaker away from other wireless equipment

FEATURES

True Wireless Stereo System
Portable Speaker System

High-Powered Loudspeaker Style
Wireless BT Music Streaming Ability
Built-in Rechargeable Battery

FM Radio with Digital LED Display
Connect & Stream Audio from External Devices
Aux (3.5mm) Input Connector Jack

USB Flash Memory Reader
Micro SD Card Reader
6.5mm Microphone input

Battery Level LED Indicator Lights
Recording Function
Microphone Priority Function

Microphone Echo Adjust Knob
Bass & Treble Adjust Knobs
For Indoor / Outdoor Use

FAQ’s

Exactly why won’t my Pyle speaker connect?
The speaker may need to be unpaired, then repaired with your smartphone. 1. Before starting the connection procedure, make sure the Bluetooth Speaker is ON.
How do I restart my Pyle Bluetooth speaker?
By hitting the Bluetooth disconnect button, you may force your speaker to reset any active connections. Then, you may connect your audio device.
How is a Pyle Bluetooth speaker recharged?
Connect this amplifier system to the power supply by inserting the power cord into the socket. Turn the amplifier on. Red appears on the Power Indicator. When the battery is charging, the RECHARGE indication glows red, flashes when it is almost full, and turns off when it is fully charged.

Wireless Pyle speakers, are they?
You can pick from a large selection of wireless portable speakers at Target from top manufacturers like JBL, Bose, and Sony. Take a look at a variety of portable speakers that you can take everywhere. They are perfect for on-the-go music or podcast listening.
Why can’t Bluetooth locate devices?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
How can a Bluetooth speaker be reprogrammed?
Press and hold the Bluetooth logo-adorned button for two to three seconds to renew the speaker’s connections with currently connected devices, which enables you to pair with the device. For this method to work, you must be quite close to the speaker.

How can I tell when the battery in my Bluetooth speaker is full?
If the battery is fully charged, the CHARGE indicator won’t turn on. Depending on the model, the speaker’s CHARGE indication could not turn on while it is being charged. The CHARGE indicator will turn on if the battery is charging while the speaker is off.
How can I make my Bluetooth speaker’s battery last longer?
Your best options are a portable battery pack and rapid charging capabilities. A shorter battery life can be compensated for by rapid charging. This capability, which not all speakers have but is quite helpful nonetheless, may take a dead battery and resuscitate it for a sufficient length in a half-hour or less.
What is the charging time for a Bluetooth speaker?
How much time does it take Bluetooth speakers to charge? The charging process for speakers using AC mains power typically takes 6 to 8 hours. A USB-charged speaker will take around 3–4 hours to completely charge.

What happens if a Bluetooth speaker is overcharged?
No, as soon as the charger and battery achieve balance, the gadget will cut off the charging circuit.

View Fullscreen

References

User Manual

Pyle Vintage Bluetooth Speaker, Leather Portable Wireless Retro Style Speaker

Specifications