Pyle PPHP836B Portable Bluetooth PA Speaker System Product
WARNING
- DO NOT place objects on top of the device, as objects may scratch the device.
- DO NOT expose the device to dirty or dusty environments.
- DO NOT insert any foreign objects into the device.
- DO NOT expose the device to strong magnetic or electrical field.
- DO NOT use the device in the rain
- Please check with your Local Authority or retailer for proper disposaI of electronic products.
- DO NOT disassemble the device. Only a certified service technician should perform repair.
- The device has apertures to disperse heat. DO NOT block the device ventilation, the device may become hot and malfunction as a result.
Illegal operation may cause personal injury, which could be fatal and may cause damage to property.
FRONT PANEL FUNCTIONS
- Master volume control
- Charge LED indicator
- DC 5V input jack
- Short press to choose input signal, press and hold to turn ON/OFF light
- Next/select saved radio station.
- Play/Pause/TWS function/In FM mode, press and hold to search radio station automatically and save.
- Previous/select saved radio station
- AUX input jack
- USB input jack
- Microphone input jack
- Display screen
REMOTE CONTROL FUNCTIONS
- Power: Used to turn on and off the MP3 player power
- MODE: Used to switch the AUX/USB/Wireless BT/Radio
- Mute button
- Play/Pause/Press and hold for TWS/In FM mode, press and hold to search radio station automatically and save
- Next song/In FM mode, short press to select saved radio station
- Previous song /In FM mode, short press to select saved radio station
- EQ solution
- Increase volume
- Choose song number directly/In FM mode, choose FM Frequency directly
- Choose USB or SD signal directly (Only suitable for models with USB & SD both)
- Decrease volume
- Repeat song
TWS FUNCTION
For increase sound effect, our unit provides TWS function as follows:
- Step-1: Turn ON BT mode on your device and connect the machine.
- Step-2: Press and hold each control board “TWS” button more than 3’s, and you will see “ON” on display, unit will start to connect the other unit automatically, now you can enjoy stereo sound, and adjusting one unit volume will affect the other unit.
Remark:
- After connection, press and hold again one of control board “TWS” button more than 3’s, you will see “OFF” on display, unit’s TWS disconnection.
TROUBLESHOOTING
FEATURES
- True Wireless Stereo System
- Portable Speaker System
- High-Powered PA Loudspeaker Style
- Wireless BT Music Streaming Ability
- Multi-Color Flashing LED Party Lights
- Built-in Rechargeable Battery
- FM Radio with Digital LED Display
- Connect & Stream Audio from External Devices
- Aux (3.5mm) Input Connector Jack
- USB Flash Memory Reader
- 5mm Microphone input
- Battery Level LED Indicator Lights
- Rugged & Durable Molded Cabinet Design
- Convenient Extendable Carry Handle
- For Indoor / Outdoor Use
WIRELESS BT STREAMING
- Built-in BT for Wireless Music Streaming
- Simple & Hassle-Free Pairing
- Works with All of Today’s Latest Devices
- Smartphones, Tablets, Laptops, Computers, etc.
- Wireless BT Version: 4.2
- Wireless BT Network Name: ‘PYLEUSA’
- Wireless Range: Up to 32’ ft.
WHAT’S IN THE BOX
- PA Speaker System
- Remote Control
- Power Adapter
TECHNICAL SPECS
- Material: Polypropylene (PP)
- Max Power Output: 300 Watt Max
- Sound System: 8’’ -inch Subwoofer + 1”Tweeter
- Impedance:0 Ohm
- Frequency Response: 50Hz-12KHz
- USB Interface Type:0
- Digital Audio File Support: MP3
- Maximum USB Flash Support: 32GB
- Remote Control Battery Operated, 1 Piece Button Cell Battery CR-2025 (Included)
- Battery Life: Up to 2 Hours (Charge Time: Approx. 4 Hours)
- Rechargeable Battery:7V, 1800mAh – 6.66 Wh
- Power Supply: 120/240V, Switchable (5V/2A Power Adapter)
- Dimensions (L x W x H):9’’ x 7.8’’ x 13.2’’ –inches
WARNING: This product can expose you to a chemical or group of checmicals, which may include “Lead and lead compounds” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/
SUPPORT
Questions? Issues? We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
FAQs
You can connect this amplifier system to the power source by inserting the power cord into the socket. Turn the amplifier on. Red appears on the Power Indicator. When the battery is charging, the RECHARGE light is red. It flashes when it is nearly full and turns off when it is finished.
The strength of your speakers is unaffected by putting them in standby mode or turning them off entirely. This means that even when they are not in use, it is OK to leave them plugged in to the mains (AC power).
The device has a battery life of about 8 hours. Allow 8 to 10 hours on average for charging. Pyle Why won’t Bluetooth connect? You might need to unpair the speaker first before pairing it with your device once more.
Speakers On/Off Button To switch on all speaker pairs at once, press the button. Press the button one more to turn it off.
The device can be charged using any micro USB connection as well as a USB port on a computer or laptop. You may charge the speaker using the charger from your phone because the majority of modern smartphones use the same micro USB port.
Press and hold the BATT (battery) and LIGHT buttons inside the speaker cap for around 3 seconds to switch on or off the lighting feature. By pressing and holding the button down for a further three seconds, the illumination feature can be turned back on or off.
Press the Forward or Backward button on the gadgets or mobile phones to choose your preferred music. The volume can be changed using the Bluetooth device. You can also hold down the Forward or Backward buttons for a long time to adjust the volume.
HOW TO LINK. Pyle Audio may be enabled in the Bluetooth settings of your iPhone or Android device. After keying in your pairing code, 0000, click it.
Turn on BT mode on your phone before starting the pairing process. The name “PYLE” will appear when the phone locates this ship/car audio system. In order to pair and connect with this ship/car audio system, choose “PYLE” from the list of devices. The BT logo will stop flashing after you confirm.
The sound quality is decent for the price. The microphone offers a wide viewing angle, excellent clarity, and little ambient noise. several combinations of inputs Actually, echoes and bass/treble have a major (and positive) impact on sound.
Despite being a cheap speaker, it boasts a built-in microphone, a sturdy design, and fantastic sound for a backyard event!
Yes!” For a loud, booming sound, you can replace the default car speakers with PA speakers. Of course, in order to benefit from the superior quality of these speakers, you must ensure that they are mounted correctly and that you have access to electricity.
If the performance is indoors, you should try to have at least five watts of power per performer. To play outside or at “rave loudness,” increase it and use 10 watts per person.
