Pyle PDWM2135 Channel Microphone System
With its dual frequency channel, broad audio response range, and low distortion, this black Pyle Pro wireless microphone system allows you to perform energetically on stage while enjoying cordless karaoke singing. With a channel frequency range of 174–216 MHz and a strong signal–to–noise ratio performance, this professional portable wireless microphone set can record audio of the highest quality. Ideal for conferences and professional interaction. To balance the vocals as needed for a karaoke experience that both kids and adults would enjoy, each dynamic or lav mic has its own volume control.
Perfect for a DJ party, PA, or karaoke. Both the receiver and the microphone include an ON/OFF power switch, and the receiver has a dual independent antenna and an LED status signal indicator light. Use a 1/4″ mono cable to connect your device to your mixer, amplifier, or speakers.
This microphone system operates on high-efficiency, low-consumption discharging techniques. Performance features include independent developed mobile frequency compression, expander circuitry, image frequency limiting circuits, multiple-checked silent and noise-free circuits, antenna diversity receiving circuit & switch impact noise defeat circuits.
SIMPLE INSTALLATION AND OPERATION
- Please note- select models come equipped with different transmitters and microphones.
- Unscrew the bottom of the microphone (or slide open the battery compartment tray of the belt-pack transmitter) to install two ‘AA’ Batteries. Screw the Battery cap back on.
- Plug your receiving unit into your mixer or amplifier with a 1/4″ mono microphone cord.
- Plug the receiving unit into your electrical wall outlet.
- Turn the receiver ON by using the ON/OFF switch located at the front of the unit.
- There is a switch located on each of the two microphones that turns each microphone ON/OFF & mutes them individually.
PDWM2135
SYSTEM FEATURES
- VHF Narrow Band Receiver System
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Dual Independent Channel Antennas
- RF Signal and AF Signal LED Indicators
- Radio Frequency and Audio Frequency
HANDHELD MICROPHONES
- RF Power Output: >13dBm
- Modulation Degree: >30KHz
- Power Current: <110mA
- Harmonic at Higher Degree: <60dB
- Modulation Pattern: FM
- Battery Powered, Require (2) x ‘AA’ Batteries -Each
SYSTEM RECEIVER
- Sensitivity: -95dBm (S/N:12dB)
- RF Image Rejection:-75dB
- Audio Dynamic Range: 95dB
- H.D.: <1%
- S/N Ratio: >70dB
- Neighboring Channel / Interference: >70dB
- Power: AC 120V, 60Hz
- Receiver Dimensions (L x W x H):
- 07” x 5.75” x 1.64”
WHAT’S IN THE BOX
- Receiver Base
- (2) Handheld Microphones
FAQs
Is it possible to select a channel or frequency? In other words is it possible to use 2 of these units (4 mics) without interfering with each other.
No.
The product detail state that mic operated on 2 AA battery but you answered it as 9v. What’s correct?
2 AA batteries is correct.
Is everything in the kit with it to make it work, or does anything else need ordered with it? Would it work good for an outdoor wedding ceremony?
This Mic is not high-powered, but works well when held up close. You will need to plug to an amp in addition to the items shown. I like the product.
Will these handheld mics work with the pdwm 2145? looking for 2 headphone and two handheld mics
I hope you’re not using them for anything professional because they are complete garbage.
Will these work with a guitar amp
that will depend if there’s a microphone input port there. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWM2135.
Also do I need the stereo audio patch cable or mono audio patch cable ?
It doesn’t matter both will do.
Can you use as DJ mic
I use both mics with music playing and it is very clear. You have to hold mic close to your mouth and if you have any issues simply hold your hand around the mic when holding it to your mouth to speak into.
How do you record with this microphone?
Using another recording device.
Does this come with a cord to plug into the amplifier
Yes but it’s very short.
I bought this mic. Arrived at my house today. The sound is very good. But when I turn on the Mic #1 a noise like a beating heart or drums is coming out
This is a vhf system which IS privy to interruption from other signals.
Can I use them in my home theater with an adapter? (Logitech Z906, it has 3.5mm input)
I’d say with a 1/4″ to 3.5mm(1/8″?) adapter, it should work.
Where to connect with built in speakers with amplifier ?
You should connect the output from mic receiver to the input of the speakers.
What else do I need to buy in order to get this working?
Batteries but stopped working after 10 uses.
Has anyone had one mic stop working after a couple months of purchase? Mic A is connected to the speaker but with no sound
Not yet. But I’ve had both mics lose connection intermittently at close range , embarrassing in front of big crowds.
Can I hook this up to a guitar amp?
Yes, it’s works perfects.
