Pyle PBKSP52 Active & Passive Bookshelf Speakers
CAUTIONS
- All Operating Instructions should be read before using this equipment.
- To reduce the risk of electrical shock, do not open this unit. There are NO REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician.
- Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
- This unit should only be cleaned with a damp cloth. Avoid solvents or other cleaning detergents.
- When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.
- DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
- DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES
- Make sure All of your equipment is completely OFF and LOWER ALL VOLUME, LEVEL & GAIN controls before connecting a sound source.
- Only LINE LEVEL SIGNALS SHOULD BE SENT TO YOUR SPEAKER.
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
CAUTION: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified personnel.
DANGER: This symbol is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure, it may have sufficient magnitude to constitute a risk of electric shock to persons.
WARNING: This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CONTROLS AND CONNECTIONS
FUNCTIONS
- SPEAKER IN: To connect an active device
- MIC IN: Connect for Mic input
- 5MM AUX IN: Connect Mobile device
- TONE: Control the volume of the mic
- VOL: Control the volume of the unit
- BT: Will light up when wireless BT is connected
- POWER: The unit display will light up
- EXT SPEAKER: To connect a passive speaker
- POWER SWITCH: Power switch ON/OFF the unit
- POWER CORD CONNECTOR: Connect the IEC main power cable in order to supply the unit with the fuse 250V/3.15A
PLACEMENT TIPS
- Avoid placing loudspeakers in the corners of a room.
- This increases the low-frequency output and can cause the sound to be muddy and indistinct.
- Avoid placing loudspeakers against a wall. This, too, increases the low-frequency output, though not as much as corner placement. However, if you do need to reinforce the low frequencies, this is a good way to do it.
- Avoid placing the active speakers directly on a hollow stage floor. A hollow stage can resonate at certain frequencies, causing peaks and dips in the frequency response of the room. It’s better to place the speakers on a sturdy table or tripod stands.
- Position the speakers so the high-frequency drivers are two to four feet above ear level to the audience to maintain high-frequency quality.
WIRELESS BLUETOOTH CONNECTIVITY
- Simple & Hassle-Free Pairing
- Instantly Receives Wireless Music Streaming
- Works with all of Today’s Latest Devices
- Smartphones, Tablets, Laptops, Computers, etc.
- Bluetooth Version: 4.2
- Bluetooth Name: PyleUSA
- Wireless Range: Up to 33’+ ft.
FEATURES
- Bookshelf Desktop Speakers
- Pro Audio Studio Monitor Performance
- Powered Active + Passive Speaker System
- Hi-Fi Full Range Stereo Sound Reproduction
- Bluetooth Receiver for Wireless Audio Playback
- Built-in Digital Audio Amplifier
- Connect & Stream Audio form External Devices
- Combo XLR 1/4‘’ Stereo Mic Input
- Aux (3.5mm) Input Jack
- RCA (L/R) Aux Audio Input (Active)
- Tone, Master Volume Audio Adjustment
- 2-Way Full Range Stereo Sound Reproduction
- Vented Enclosure for Impressive Bass Response
- Power ON/OFF Switch
WHAT’S IN THE BOX
- Active Bookshelf Speaker
- Passive Bookshelf Speaker
- Speaker Connection Cable
- Power Cable
SUPPORT
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
TECHNICAL SPECS
- POWER OUTPUT: 400 Watt MAX
- AMPLIFIER TYPE: Class AB
- MONITOR SPEAKER DRIVERS: 5’’ -inch, Cone Type/KSV
- TWEETER DRIVERS: 1.0’’ -inch Dome, Cortina
- SYSTEM CHANNEL IMPEDANCE: 8 Ohm
- FREQUENCY RESPONSE: 60Hz-20KHz
- SENSITIVITY: 94dB
- SPEAKER CONNECTION TYPE: 1/4’’ -inch
- SPEAKER CONNECTION CABLE LENGTH: 19.7’ ft.
- CONSTRUCTION MATERIALS: Wood Housing, Metal Alloy
- POWER CABLE LENGTH: 4.9’ ft.
- POWER SUPPLY: 120/240V
- SINGLE SPEAKER SIZE: (W x D x H): 9.06’’ x 6.68’’ x 9.62’’ -inches (Each)
- SINGLE SPEAKER WEIGHT: Active, 9.35 lbs. (Passive, 6.35 lbs.)
FAQs
How do you set up Pyle PBKSP52 bookshelf speakers?
You must appropriately position the speakers whether you put the bookshelf speaker on a real bookshelf, on speaker stands, or on top of a media console. As a general rule, bookshelf speakers should be positioned at the 10 and 2 o’clock positions, with their angles pointed in the direction of your favourite listening position.
Are Pyle PBKSP52 bookshelf speakers passive?
Bookshelf speakers typically consist of two drivers, a tweeter and a woofer, and are passive speakers (i.e., they lack built-in amplification) (for the high and low frequencies, respectively).
How do I connect active Pyle PBKSP52 bookshelf speakers to my computer?
You must first plug in and turn on your external amplifier before ensuring that the output is the amplifier and not your computer’s built-in speaker under the audio settings of your computer. That’s it, then.
How long should Pyle PBKSP52 bookshelf speakers last?
A quality speaker system can last for many years. The response to these queries depends on the features, the calibre of the construction, and the components of the speakers. If you take care of them, speakers typically last 10 to 20 years before needing to be replaced.
How can I power a Pyle PBKSP52 passive speaker without an amp?
Since AV receivers have the power to amplify passive speakers, they can frequently take the role of an external amplifier. For instance, you can use a phono cable to link your passive speaker wire to the device and then to the computer’s sound output.
Do I need an amp for Pyle PBKSP52 bookshelf speakers?
An amp is not necessary for the operation of active bookshelf speakers. But an amplifier is necessary for passive bookshelf speakers to function effectively. Bookshelf speakers that are active already have an amplifier installed; passive speakers do not. It will be incredibly silent if a passive bookshelf speaker is utilised without an amp.
How do you connect Pyle PBKSP52 active and passive speakers together?
Using a mixer is the safest approach to combine powered and passive speakers. Get a mixer with two outs to output your signal. Run one set of speakers to the powered ones and the other set to the passive ones. Make sure the power and wire connections are tight and secure by checking them twice.
How can I make my Pyle PBKSP52 passive speakers louder?
There is a group of comparatively simple answers that proceed as follows: – Connect your speakers’ wire to a location outside the “wet area” Ideally, to a location with a power source. – Find an amplifier with a 3.5mm input that is as inexpensive as possible and pushes its speaker or speakers as loudly as or louder than you need.
How do I know if my speaker is active or passive?
Active speakers require power, but passive speakers don’t, and this is the fundamental distinction between the two types of speakers. As opposed to passive models, which require additional amplifiers, active models come with built-in amplifiers.
What are Pyle PBKSP52 bookshelf speakers best for?
Bookshelf speakers should not be placed on the ground; instead, they should be placed on a shelf, table, or another elevated surface. They are made with the intention of enhancing sound in tiny to medium-sized settings.
Do you need a subwoofer with Pyle PBKSP52 bookshelf speakers?
This demonstrates that not all bookshelf speakers are made equal and that the best audio experience can be had without a standalone subwoofer with the correct design and high-quality parts. All things considered, many bookshelf speaker systems can perform just well without a subwoofer.
Can you leave Pyle PBKSP52 powered speakers on all the time?
Your powered speakers should be turned off after usage and should not be left on. There are a number of causes for this. Particularly, leaving your powered speakers on can degrade and harm its parts over time, perhaps posing a safety risk.
Can I put Pyle PBKSP52 bookshelf speakers on their side?
Although it’s not ideal, bookshelf speakers can be positioned on their side. It’s probable that this will have a detrimental effect on sound quality. While not ideal, horizontal positioning might be acceptable if your goal is casual listening. It’s not best to position bookshelf speakers sideways for sound quality.
How high should my Pyle PBKSP52 bookshelf speakers be?
Furthermore, utilising an average ear height of 91cm to 96.5cm (36-38″) is frequently just as acceptable as measuring the distance from your ears to the floor if more than one person will be listening to the speakers or if you frequently have friends around.
What is a Pyle PBKSP52 passive bookshelf speaker?
A passive speaker requires a speaker wire to be connected to your amplifier because it lacks an amplifier of its own. The speakers can be adequately driven by this speaker-level signal because it has been amplified.
