Pyle Home Audio Power Amplifier System – 2x120W Dual Channel
Introduction
Your entertainment system gets a boost with the Pyle Dual Channel Audio Amplifier! It provides acoustically realistic audio reproduction with little distortion. It allows you to enjoy speakers with a 4-ohm impedance and high-quality music. The professional amp is compatible with a number of external devices, including USB, SD, and headphone jack. You can connect your smartphone, iPhone, computer, MP3 player, or CD player to the speaker’s 3.5mm AUX or RCA input for surround sound. The compact personal integrated indoor stereo receiver has an integrated LCD control screen that lists all the inputs and functions being used. For remote audio adjustments, a 12V converter and remote control are provided in the package. Avoid using strong solvents, chemicals, or detergents.
It enables a simple direct speaker wire connected to the amplifier. The common stereo output’s speaker impedance is 4 Ohms. In stereo mode, the total speaker impedance must be at least 4 Ohms per channel. With crisp buttons and rotary knob controls for audio adjustment, this multipurpose 2-channel compact home theatre digital stereo amplifying box is ideal for home theatre systems. Additionally, a blue LED volume knob that doubles as a power indicator is present.
FEATURES AND CONTROLS
- Power ON LED Indicator
- Lights to indicate power is turned on.
- Blue LED Output Level Display
- Master Volume Control
- Let’s you adjust the overall sound level, turn the knob clockwise to increase the volume.
- Function Blue LED Display Window
- AUX/ CD IN
- Let’s you easily connect the computerized MP3 Device ( player) sources, such as PC( CD ROM), laptop, Walkman, iPod, and cell phone.
- 1/ 4″PHONE JACK
- Accept headphones with 1/ 4” plug.
- TREBLE
- Let’s you adjust the TREBLE volume to high or low.
- BASS
- Let’s you adjust the BASS volume to high or low.
- Buttons for MP3 (USB/ SD/ MMC) Function Control
- Mode: For audio input selection.
- Play/ Pause: Play and pause control.
- Next: Quick backward or next song.
- SD/ MMC Socket for playing SD/ MMC cards
- USB Socket for playing the USB function.
- RCA L/ R LINE Input
- Let you connect to the desired LINE input sources.
- Push Type Speaker L/ R Terminals
- Let you easily connect the speakers ‘wires directly to the amplifier
- Fuse
- The amplifier uses a fuse for protection against surges and short circuits. If the amplifier suddenly turn off and will not turn on, check the fuse. If necessary, replace it with a 1- amp, 250- volt, fast-acting, 5x20mm fuse( not supplied)
- 110V/ 220V Switch
- According to power voltage, push this button to the correct station of the 110V or 220V.
- AC IN Power Cord
- Connect to AC 110V/60Hz or 220V/50Hz
REMOTE CONTROL FUNCTION
- Power Standby Button
- Play/ Pause Button
- Equalizer Button
- Repeat Song Button
- Mode: Menu Control Button
- Mute Button
- Previous Song Button
- Next Song Button
- Volume – & Volume + Buttons
- USB/ SD Switch Button
- Number Buttons for Song Selection
SPECIFICATIONS
OUTPUT POWER, 2 CHANNELS DRIVEN
- 4-Ohm, 1 kHz, 1% THD: 20Wx2 (PCAU46A)
- MAX POWER: 120Wx2
- TOTAL HARMONIC DISTORTION: 1 kHz rated power: 0.3%
- INPUT SENSITIVITY: 1 kHz, 4-Ohm Rated Power
- AUX 1: 250mV
- AUX 2: 250mmV
- CD: 250mV
- USB: 250mV
- MIC: 2.5mV
- FREQUENCY RESPONSE: 20Hz-20 kHz
- SIGNAL TO NOISE RATIO: 1 kHz, 4-Ohm Rated Power
- AUX 1: 80dB
- AUX 2: 80dB
- CD: 8OdBB
- USB: 80dBB
- MIC: 7OdB
- TONE CONTROLS
- BASS: +/-12dB, 100Hz
- TREBLE: +/-12dB, 10 kHz
- POWER REQUIREMENT: 120V AC 60Hz/230V AC 50Hz
LIMITED WARRANTY
All PYLE Products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retall purchaser of the amplifier.
Should the unit fall due to factory defects in material or workmanship, your unit well be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline at 718-236-6948 to obtain a Return Authorization Number.
This R.A# must appear on the outside of your package and on all paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to:
You must also include the following items with your return:
- A copy of your sales receipt or other proof of purchase
- A brief letter, indicating the problem you are experiencing with the product
- Include in your return address, daytime phone number and RA number
- Also include a check or money order for $20.00 for return shipping, handling and insurance, or provide your Visa/ MC number with expiration date.
Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage
SPECIFICATIONS
- Output power, 2 channels driven
- 4-OHM, 1 KHz, 1% THD: 20Wx2(PCAU46A)
- Peak Power: 120Wx2
- Total Harmonic Distortion, 1 KHz Rated Power: 0.3 %
- Input Sensitivity, 1 KHz 4-ohm Rated Power: 250mV
- Frequency Response: 20Hz-40 KHz
- Signal to Noise Ratio: 75dB
- Power Requirement: 120V AC 60Hz or 230V AC 50Hz
CARE AND MAINTENANCE
Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use:
- Keep the amplifier dry. If it gets wet, wipe immediately.
- Use the amplifier only in well-ventilated installations.
- Handle the amplifier gently and carefully – do not drop it!
- Keep the amplifier away from dust and dirt.
- Wipe occasionally with a damp cloth to keep it looking new.
- Do not use harsh chemicals, solvents or detergents!
Frequently Asked Questions
Amplifiers shouldn’t be left on since prolonged and continuous heat exposure might cause internal components, including the filament, to wear out. Quality and dependable amplifiers can run continuously for hours, days, or even weeks without experiencing any damage. It’s advisable to switch your amps off when not in use, though.
The answer to the question “do amplifiers increase sound quality?” is no, in a nutshell. An amplifier is made to boost the levels of audio signals. However, neither the recorded audio nor the reproduction of such audio is meant to be improved, either objectively or subjectively.
If your speakers are 90 dB efficient and you enjoy listening to loud, uncompressed music, 200 Watts should be more than plenty for you. 50 Watts is plenty if all you listen to is jazz and light classical music and you don’t expect them to rock the house. Horns and other speakers with higher efficiency consume relatively little power.
The likelihood that your amp will sound as good as new is high if you change them every 10 or 20 years. This is what? Of course, you shouldn’t make any changes if there are no problems with your amp or the sound. The finest part about amps is probably that you can quickly determine whether anything is wrong.
A tube amplifier is made to operate continuously. However, this is not a suggestion. Most manufacturers advise against playing continuously for longer than 6 to 8 hours without at least a 30-minute cool-down period.
Actually, depending on how they were handled, amplifiers can lose power with time.
A power amplifier (PA) increases the power of a low-power signal. Audio amplifiers, which are used to power speakers and headphones, and RF power amplifiers, which are utilized in the transmitter’s final stage, are two typical examples.
The power amp can significantly alter the sound, however it has little effect on the tone.
Two speakers are often a manageable load for most amplifiers. Similar to a passenger on a tiny motorbike: carrying two passengers doubles the load that the bike must carry, but most bikes can manage this. However, if you add more speakers than two, the amplifier will typically get overloaded.
The house speaker should have wattage of between 15 and 30 watts. The majority of homeowners deem 20 watts enough. A speaker might be 50 watts or 100 watts in power for larger crowds.
