Pylev

Pyle, Black, Floor-Standing

Pyle=-Black-Floor-Standing-imgg

Specifications

  • Item Weight 
    43.4 pounds
  • Product Dimensions 
    13.6 x 15.2 x 36.8 inches
  • Speaker Amplification Type
    Active
  • Output Wattage 
    1000 Watts
  • Size 
    Floor-Standing
  • Power Source 
    Corded Electric
  • Wattage 
    1000 watts
  • Connectivity Technology 
    Bluetooth
  • Speaker Type 
    Tower, Bluetooth, Tweeter, Subwoofer
  • Recommended Uses For Product 
    For Smartphones or Tablets
  • Speaker Configuration
    2-Way Loudspeaker
  • Number of Input Channels
    3 (3 x Mono, 2 x Stereo)
  • Amplifier Power Rating
    1000 W Peak (at 4 Ohms)
  • Enclosure Type
    Bass-Reflex
  • HF Driver
    2 x 3″ / 76.2 mm Piezo Tweeter
  • LF Driver
    2 x 10″ / 254 mm Woofer
  • Magnet LF Driver
    25 oz / 708 g
  • Speaker Sensitivity
    90 dB
  • Crossover
    3.2 kHz
  • EQ
    Yes
  • Semi-Parametric EQ
    None
  • Effects Echo
    (Type Unspecified)
  • Frequency Response
    20 Hz to 20 kHz
  • Brand
    Pyle

Introduction

To liven up the party, the Disco Jam Stereo Speaker Systems were created. Play your preferred music in a stylish manner and at maximum volume. Disco Jam speakers will liven up any occasion with its outstanding high-power output and flashing DJ lights. Utilize them at home, on stage, or in a crowd of people. They’re ideal for any gathering and will give you the impression of a true DJ. With the Disco Jam Speaker Systems, start the party.

Disco Jam Speaker System, PSUFM1035A Disco Jam Speakers, and bigger Pyle’s Disco Jam Speakers can help you get the party started. Play your preferred music in a stylish manner and at maximum volume. Disco Jam speakers will liven up any occasion with their outstanding high-power output and DJ lights. Bluetooth Thanks to the integrated Bluetooth technology, you may wirelessly listen to your favorite music or online radio stations like Pandora or Spotify. Stream music instantly from your PC, MP3 player, tablet, iPhone, Android, or another device. DJ lights that flash Built-in lighting dazzle and elevate the celebration. When your music starts playing and the lights start flashing, you’ll feel like an actual DJ at the club. When the speakers are activated, multicolor racing lights can be controlled via an ON/OFF switch.

There is music. Passive & Active Certain Disco Jam systems have cross-compatibility features that let you connect additional active or passive speakers to your existing audio system or use the speakers separately. The PSUFM1035A is an Active Speaker that works with various Passive Speakers, but it complements the PSUFM1030P especially well (Sold Separately). Funk Jam When you mix audio playback with visual presentation, get ready to jam. Disco Jam style karaoke The ideal Karaoke events and performances use Disco Jam speakers. To make a fantastic sounding and looking party, combine active and passive models with a microphone input. The device has two 1/4″ microphone inputs. Mountable speaker stands On the bottom of every Disco Jam model are 35mm Speaker Stand Mounts. the thing. Sound and fashion Two 10-inch subwoofers and two 3-inch Piezo tweeters are included with the PSUFM1035A. Reproduce a wide variety of 2-way stereo sounds with a powerful output. Back Panel The AC Power Input Cable, RCA Connectors, Antenna, System Power Switch, and Flashing DJ Lights Power Switch are all found on the back of the device.

Safety Notes

  1. Correct power must be used to operate this unit properly, do not use any other powering options, Coras Or methods.
  2. Carefully handle, plug and unplug the power cable when handling. Hold the plug With a firm grip when plugging or unplugging from SoCketS.
  3. Do not open the chassis! Extremely dangerous! Do not put your hands 1nside the chassis. If the device begins to malfunction do not attempt to repair it, unplug the unit and contact Pyle immediately.
  4. Don t use volatile or dangerous chemical cleaners on the unit (1ike toluene, alcohol, gasoline, etc. ) Use gentle cleaners.
  5. Keep the unit in a well-ventilated environment and keep away Irom, direct Suniignt to prevent unit Irom Overheating.
  6. Avo1d the unit from mo1Sture or rain.

Operating Controls- system Layout

  1. Guitar Input Jack
  2. USB/SD Jack
  3. Guitar Volume Control
  4. Echo Control
  5. EQ Switch
  6. Mic Volume Control
  7. Bass Control
  8. Mic Input Jack
  9. Treble Control
  10. Metal Corner
  11. Volume Control
  12. Racing lights
  13. Line-In/Aux Audio Input
  14. tweeters
  15. EQControl
  16. Speaker handle
  17. Next Control
  18. Woofer Speaker
  19. Play /Pause Control
  20. Vent Hole
  21. Woofer confinement
  22. Prev Control
  23. Mode Control
  24. Speaker machine feet

Pyle=-Black-Floor-Standing-fig-1

Speaker Board Schematic

  1. Fm Antenna
  2. Line-In/ Aux Audio Input
  3. Lights Switch
  4. Vice-Box Power output
  5. Ac Power Supply
  6. Power Switch
  7. Line-Out/ Aux Audio Output
  8. Voltage Selector Switch

Pyle=-Black-Floor-Standing-fig-2 Remote Control Diagram

  1. Mute switch
  2. Power
  3. 0-9
  4. Mode Control
  5. AUX
  6. FM
  7. VOL+
  8. VOL
  9. EQ
  10. Fm Scan
  11. USB/SD Selector
  12. Repeat
  13. Prev Control
  14. Next Control
  15. Play/Pause Control

Pyle=-Black-Floor-Standing-fig-3

Bluetooth compatibility

Allows for wireless audio streaming and this box-style disco jam powered loudspeaker is compatible with devices including iPhone, Android smartphones, iPad, tablets, and PCs. Perfect for personal indoor, outdoor, and residential use.

FLASHING DJ LIGHTS

The portable two-way speaker has multi-color flashing disco LED lights with an on/off to switch that will liven up any event. This feature is ideal for patio parties or gatherings at night when a colorful presence is noticed.

CONTROL PANEL UPPER

A top control panel for this product’s guitar, bass, treble, main volume, echo, and microphone volume levels is also included. A mode control and an EQ switch are also included. a 35mm stand mount, a remote, and an audio cable are included.

Frequently Asked Questions

  • How do you connect the passive speaker to the active speaker?
    The passive speaker has a wire that connects to the back of the active speaker.
  • Do it has Bluetooth microphones?
    it doesn’t have a Bluetooth microphone. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSUFM1035A for more details.
  • Does it have a rechargeable battery? 
    No battery. You plug it into the wall.
  • Would this be loud enough for a party at a banquet hall? 
    Yes, this would work for a party at a banquet hall.
  • Speaker wasn’t speaking Chinese at first now it started when I turn on or change input, how do I turn it off? 
    Look up Pyle support under the warrant to text them or call them.
  • Has anyone figured out how to Program stations? Not in manual 
    Hi, unfortunately, we cannot program the FM station for this unit.
  • Where are the Speaker Output Clips for a passive speaker located? I can’t see those in any of the photos in the product description.
    The speaker clips are at the back of the passive speaker.
  • Are the speaker covers supposed to light up? All that seems to light up is the screen at the top. 
    There is a toggle-like switch in the back of the active speaker that engages & disengages the top screen lights. The speaker cover lights will automatically light up when volume is turned up almost at full volume & note: is really loud. You will never see the speaker cover lights at a respectable volume via apt or studio apt.
  • I see this has a USB port for charging. Can you put a USB flash drive with music on it and will it play it
    Yes. The used port will play music using a USB flash drive. It will not play music using your phone through the USB port. The phone has to be played through Bluetooth or aux input
  • Does it have beat-sync? 
    Yes, The lights blink to the music’s beat if that’s what you mean
  • Does this come with microphones? 
    No, it doesn’t come with a microphone.

References

Leave a comment

Your email address will not be published. Required fields are marked *