PWNAGE Trinity CF Gaming Mouse

PWNAGE Trinity CF Gaming Mouse

WHAT’S IN THE BOX

  • Trinity CF
  • High speed USB Receiver Pyramid
    What's in the Box
  • Black Grip Tapes
    What's in the Box
  • USB-C Cable
    What's in the Box

FUNCTION LAYOUT

  • A. Left mouse button
  • B. Scroll wheel
  • C. Right mouse button
  • D. Forward button
  • E. Back button
  • F. USB Type C port
  • G. PTFE mouse feet
  • H. Pwnage adjustable sensor
  • I. ON/OFF Switch
    Function Layout

COMBINED FUNCTION KEYS

The DPI stages are.
400 Red / 800 Green / 1600 (default) Dark blue / 3200 Orange / 6400 Yellow

To cycle through the DPI stages

Press at the same time E + B + C and hold pressed down for 3 Seconds

After switching to the corresponding DPI setting, there will be a corresponding indicator light (the color can be adjusted in the software)
To cycle through the DPI stages

The Polling Rate modes are:
125Hz/250Hz/500Hz/1000Hz (default) / 2000Hz / 4000Hz/8000Hz

To cycle polling rate

Press at the same time A+ B + C and hold pressed down for 3 Seconds
To cycle polling rate

The light flashes once, which means the switching is successful

The Lift Off Distance (LOD) settings are: Imm(default)/2mm

To adjust the LOD

Press at the same time D + B + A and hold pressed down for 3 Seconds
To adjust the LOD

The yellow light flashes once, which means the switching is successful

SENSOR POSITION CUSTOMIZATION

  1. Loosen the screws slightly with the screw driver.
  2. Use the screw driver to move the screws up and down to adjust the sensor position.
  3. Tighten the screw after moving the sensor to your desired position.
    Sensor Position Customization

CONNECTING YOUR Trinity CF

A. Via Wired Mode
Connecting Your Trinity Cf

B. Via Pwnage Hyper Speed Pyramid Wireless (2.4GHz) Mode
Connecting Your Trinity Cf

* Pyramid will flash a red LED light when connecting. When connected to the mouse, the pyramid will have a solid white LED light.
For optimal wireless performance, place pyramid within 12″-24″ of the mouse and away from sources of 2.4GHz such as wi-fi routers.

Mouse Sleep Settings

Further customization available via Trinity CF Software

Defaults

Level 1 Sleep: If no movement or press is detected, the mouse enters the first level sleep mode after 30 seconds (default). Wake up by any movement or any key press.

Level 2 Sleep: If no movement or press is detected after 5 minutes, the mouse enters the secondary sleep mode. The 2.4GHz is disconnected and the Sensor LED is turned off. Wake up by pressing any key.

Low Power Alert and Charging Display

In wireless mode, the mouse light indicator will flash red 3 times every 5 seconds when the battery is low. The red flashing stops when the mouse enters a sleep mode.

To charge the mouse, disconnect the provided cable from the Hyper Speed pyramid receiver and plug it into the mouse. When charging, the mouse light indicator will remain a solid red color. The red light indicator will turn off when the mouse is fully charged.
Low Power Alert and Charging Display

RF Warning Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SAFETY GUIDELINES

  1. Do not expose the gaming mouse to liquid, extreme temperatures, humidity, dust, or direct sunlight.
  2. Do not attempt to disassemble or modify the gaming mouse.
  3. Do not attempt to clean the gaming mouse with any liquids or chemicals.
  4. Do not use the gaming mouse if it is damaged or malfunctioning.
  5. Do not use the gaming mouse if the Li-ion battery is damaged or leaking.
  6. Do not insert any foreign objects into any of the mouse openings

MAINTENANCE GUIDELINES

  1. Ensure the gaming mouse is powered off before cleaning.
  2. Use a damp cloth to gently wipe the surface of the gaming mouse to remove any dirt or dust.
  3. Store the gaming mouse in a cool, dry place when not in use.
  4. Use compressed air duster to blow out and remove dust & debris from hard to reach areas inside the mouse

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Copyright

©2024 Pwnage, LLC. All rights reserved. Pwnage and Pwnage logo are trademarks or registered trademarks of Pwnage, LLC in the United States or other countries. All other trademarks are the property of their respective owners.

Limited Product Warranty

For the latest and current terms of the Limited Product Warranty, please visit www.pwnage.com

Limitation of Liability

Pwnage shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages arising in any way out of the distribution of, sale of, resale of, use of, or inability to use the product.

General

These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Pwnage reserves the right to amend any term at any time without notice.

Logo

Documents / Resources

PWNAGE Trinity CF Gaming Mouse [pdf] User Manual
Trinity CF Gaming Mouse, Trinity CF, Gaming Mouse, Mouse
PWNAGE Trinity CF Gaming Mouse [pdf] User Manual
2A65F-PSBMCF, 2A65FPSBMCF, Trinity CF Gaming Mouse, Trinity CF, Gaming Mouse, Mouse

References

Leave a comment

Your email address will not be published. Required fields are marked *