PureTools PT-E-U3CPD-H USB3 HDBaseT Data Extender User Manual

Avoid placing heavy items on the extension cable to prevent
damage.
Do not open or remove the housing of the device to avoid
exposure to dangerous voltage.

Ensure proper ventilation during installation to prevent
overheating.
Avoid contact with liquids to prevent fire or electrical
shock.

Installation:

Follow these steps to install the device:

Select a location with good ventilation for device
placement.

Connect the device to a compatible power source using the
provided cable.
Avoid placing the device near water sources to prevent
accidents.

Ensure that the device is placed on a stable surface to prevent
falls.

Usage:

Follow these guidelines for using the product:

Connect your compatible devices to the USB Type-C port for
charging.
Ensure the input voltage matches the requirements of your
devices.

Monitor the device during charging to ensure proper
operation.
Avoid using damaged cables or adapters with the device.

Frequently Asked Questions (FAQ):

Q: Can I use this charger for both Android and Apple
devices?

A: Yes, this charger is compatible with most Android and Apple
devices that support USB Type-C charging.

Q: What should I do if the device gets wet?

A: If the device comes in contact with liquid, disconnect it
from power immediately and allow it to dry completely before
use.

Q: Is it normal for the charger to heat up during use?

A: It is normal for chargers to generate some heat during
operation. However, if it becomes excessively hot, unplug it and
contact customer support.

“`

View Fullscreen

User Manual PT-E-U3CPD-H
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material
for possible future shipment Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons. Do not dismantle the housing or modify the module. It may result in electrical
shock or burn. Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction. Refer all servicing to qualified service personnel. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water. Do not put any heavy items on the extension cable in case of extrusion. Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards. Install the device in a place with fine ventilation to avoid damage caused by
overheating. Keep the module away from liquids. Spillage into the housing may result in fire, electrical shock, or equipment
damage. If an object or liquid falls or spills on to the housing, unplug the module immediately. Do not twist or pull by force ends of the optical cable. It can cause malfunction. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. Unplug the power cord when left unused for a long period of time. Information on disposal for scrap devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Documents / Resources

PureTools PT-E-U3CPD-H USB3 HDBaseT Data Extender [pdf] User Manual
PT-E-U3CPD-H, PT-E-U3CPD-H USB3 HDBaseT Data Extender, USB3 HDBaseT Data Extender, HDBaseT Data Extender, Data Extender

References

User Manual

PureTools PT-E-U3CPD-H USB3 HDBaseT Data Extender User Manual

PT-E-U3CPD-H USB3 HDBaseT Data Extender

Product Specifications:

Product Usage Instructions:

Safety Precautions: