PULSE 4006-SSB ErgoSafetyBar with Optional Towel Bar
Product Specifications
- Model Numbers: 4006-SSB, 4006-SSP, 4006-MB, 4006-ORB PW-94006-75BSS, PW-94006-75PSS, PW-94006-75BM, PW-94006-75BRZSS
- Product Name: ErgoSafetyBar with Optional Towel Bar
- Manufacturer: PULSE ShowerSpas, Inc.
Product Usage Instructions
Installation
Tools Required: Drill, screws, masonry anchors (if necessary)
- Position the mounting flanges on the wall and mark hole locations.
- For wood or solid backing applications, drill 1/8″ pilot holes through the shower wall into the wood or metal stud. If the wall is tiled, start with a 1/8″ pilot hole through the tile, then switch to a 5/16″ masonry tile drill bit.
- Install screws through the mounting flange into the wood/metal stud or bracing. Use masonry anchors if needed.
- Once the ErgoSafetyBar is securely fastened, align the cover plate locking tabs with slots in the flange. Push the cover against the mounting until it locks.
Installation for Optional Towel Bar
Tools Required: Set screw, screw
Note: The Towel Bar is sold separately at www.PulseShowerSpas.com
TOOLS REQUIRED FOR INSTALLATION
- Electric Drill
- 1/8” wood or metal drill bit
- 5/16” masonry drill bit
- Tape measure
- Screwdriver
- Level
IMPORTANT
- Check local code for proper placement of ErgoSafetyBar to meet requirements such as ADA or ANSI 117.1 Consumer Safety Requirements.
- ERGOSAFETYBAR CAN BE MOUNTED THROUGH SHOWER WALL AND SCREWED DIRECTLY TO WOOD OR METAL STUD WHEN APPLICABLE.
INSTALLATION QUESTIONS
Before returning your ErgoSafetyBar to the store or have any question about installation or missing parts please visit the CUSTOMER CARE area on our website www.PulseShowerSpas.com.
Installation Instructions
- Position mounting flanges and mark hole locations. For wood or solid backing application, drill 1/8” pilot holes tthroughh shower wall into the wood or metal stud.
NOTE: If wall is tiled, drill a 1/8” pilot hole through tile then change to the a 5/16” diameter masonry tile drill bit. - Install screws through mounting flange and directly into wood/metal stud or bracing. Use masonry anchors if necessary.
- Once the ErgoSafetyBar is securely fastened to wall, align cover plate locking tabs with slots in flange. Push cover against mounting until it locks.
DETAIL MOUNTING INSTALLATION
INSTALLATION FOR OPTIONAL TOWEL BAR
Towel Bar sold separately at www.PulseShowerSpas.com
ABOUT COMPANY
- PULSE ShowerSpas, Inc.
- 297 Anna Street
- Watsonville, CA 95076
- 831.724.7300
- www.PulseShowerSpas.com
FAQ
- Where can I find installation help or replacement parts?
For installation assistance or missing parts, please visit the CUSTOMER CARE area on our website www.PulseShowerSpas.com. - Can the ErgoSafetyBar be mounted through a shower wall?
Yes, the ErgoSafetyBar can be mounted through a shower wall and screwed directly to a wood or metal stud when applicable. - Are the pictures shown in the manual accurate to the actual product?
No, all pictures shown are for illustration purposes only. The actual product may vary due to enhancements.
Documents / Resources
 |
PULSE 4006-SSB ErgoSafetyBar with Optional Towel Bar [pdf] Owner's Manual 4006-SSB, 4006-SSP, 4006-MB, 4006-ORB, PW-94006-75BSS, PW-94006-75PSS, PW-94006-75BM, PW-94006-75BRZSS, 4006-SSB ErgoSafetyBar with Optional Towel Bar, 4006-SSB, ErgoSafetyBar with Optional Towel Bar, Optional Towel Bar, Towel Bar |
