Ubiquiti UniFi AP AC LR Quick Start Guide

Included Components

The UniFi AP AC LR package typically includes the following items:

• UniFi AP AC LR: A circular white wireless access point unit.
• Mounting Bracket: A circular white bracket designed for wall or ceiling mounting, featuring screw holes and a locking tab.
• Ceiling Backing Plate: A circular white plate for ceiling installations.
• Flat Head Screws (Qty. 4): Four flat-headed screws for mounting.
• Keps Nuts (Qty. 4): Four nuts with integrated washers.
• Screws (Qty. 4): Four standard screws.
• Screw Anchors (Qty. 4): Four plastic wall anchors for drywall installation.
• Gigabit PoE* (24V, 0.5A) with Mounting Bracket: A black PoE adapter unit with an Ethernet port and a dedicated mounting bracket.
• Power Cord*: A standard power cord for the PoE adapter.

* The PoE adapter is included only in the single-pack of the UAP-AC-LR.

Installation Requirements

Before proceeding with the installation, ensure you have the following:

• CAT5/6 Ethernet cable
• Phillips screwdriver
• Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
• Optional: Drywall saw or keyhole saw (to cut an 18 mm hole for Ethernet cable feed)

System Requirements

To manage the UniFi AP AC LR, the following system requirements must be met:

• Operating Systems: Linux, Mac OS X, or Microsoft Windows 7/8/10
• Java Runtime Environment: Version 1.6 (1.8 or newer recommended)
• Web Browser: Google Chrome is recommended. Other browsers may have limited functionality.
• UniFi Controller Software: Version 4.7 or higher, available for download at ui.com/download/unifi

Hardware Overview

The UniFi AP AC LR features several key components:

• LED: Indicates the status of the device (details not provided in this section).
• Ports: The rear panel includes a Gigabit Ethernet port for network and power connection, and a reset button.
• Reset Button: This button serves two functions: a quick press and release restarts the UniFi AP, while pressing and holding it for more than five seconds restores the device to factory default settings.
• Cable Feed Plug: A removable plug that allows the Ethernet cable to pass through the mounting surface.
• Mounting Bracket: Features a locking tab that engages with a corresponding notch on the UniFi AP. This tab moves from an 'Initial Position' to a 'Final Position' during installation to secure the AP and prevent theft. A paper clip can be inserted into a slot to release the tab and detach the AP.

Hardware Installation

The UniFi AP AC LR can be mounted on a wall or a ceiling. Follow the steps below for the appropriate installation method.

Wall Mount

1. Prepare Mounting Location: Place the mounting bracket on the wall at the desired location and mark the screw hole positions.
2. Drill Holes: Drill 6 mm holes at the marked locations.
3. Insert Anchors: Insert the provided screw anchors into the drilled holes.
4. Secure Bracket: Use the provided screws to attach the mounting bracket to the wall.
5. Attach UniFi AP: Align the UniFi AP with the mounting bracket and twist it clockwise to secure it.
6. Connect Ethernet Cable: Connect the Ethernet cable to the UniFi AP's Ethernet port.
7. Final Check: Ensure the UniFi AP is securely attached to the bracket, indicated by a lock symbol.

Ceiling Mount

1. Prepare Mounting Location: Position the mounting bracket onto a standard ceiling tile.
2. Mark and Drill Holes: Mark the screw hole positions and drill 18 mm holes through the ceiling tile for the Ethernet cable.
3. Insert Anchors: Insert the provided screw anchors into the drilled holes.
4. Secure Bracket: Use the provided screws to attach the mounting bracket to the ceiling tile.
5. Attach UniFi AP: Align the UniFi AP with the mounting bracket and twist it clockwise to secure it.
6. Connect Ethernet Cable: Connect the Ethernet cable to the UniFi AP's Ethernet port.
7. Final Check: Ensure the UniFi AP is securely attached to the bracket, indicated by a lock symbol.
8. Mount AP: The UniFi AP is now mounted to the ceiling.

Powering the UniFi AP

The UniFi AP AC LR can be powered using either a UniFi Switch with PoE or a Gigabit PoE adapter.

Connecting to a UniFi Switch with PoE

Connect the Ethernet cable from the UniFi AP directly to a PoE-enabled port on your UniFi Switch.

Connecting to the PoE Adapter

1. Connect the Ethernet cable from the UniFi AP to the 'PoE' port of the PoE adapter.
2. Connect an Ethernet cable from your local area network (LAN) to the 'LAN' port of the PoE adapter.
3. Connect the provided Power Cord to the PoE adapter and plug it into a power outlet.

Mounting the PoE Adapter (Optional)

1. Remove the PoE Mounting Bracket from the adapter.
2. Place the bracket at the desired location and mark the positions for the two mounting holes.
3. Pre-drill holes if necessary and secure the bracket using two fasteners (not included).
4. Align the adapter's slots with the tabs on the PoE Mounting Bracket and slide the adapter down to secure it.

Software Installation

To configure and manage your UniFi AP, you need to install the UniFi Controller software.

1. Download the latest version of the UniFi Controller software from ui.com/download/unifi.
2. Install the software and follow the on-screen instructions. Detailed step-by-step instructions are also available in the UniFi User Guide.
3. After installation, launch the UniFi Installation Wizard. A login screen will appear for the UniFi Controller management interface.
4. Enter the username and password you created during setup and click 'Sign In'.

The UniFi Controller interface allows you to manage your wireless network, view network statistics, and configure settings. For comprehensive usage details, refer to the UniFi User Guide.

Mobile App Installation

Ubiquiti also offers the UniFi mobile app, available on the App Store® (iOS) and Google Play™ Store (Android). This app enables basic provisioning of UniFi APs without a UniFi Controller and provides seamless provisioning for remote controllers, as well as easy access to local controllers and those monitored on uni.ui.com.

Specifications

Notes:

• ¹ The PoE adapter is included only in the single-pack of the UAP-AC-LR.
• ² Speed and Range values may vary and are based on optimal environments.

Operating Frequency (MHz)

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.

⚠️ WARNING: Do not use this product in locations that can be submerged by water.

⚠️ WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

1. Compliance with voltage, frequency, and current requirements indicated on the manufacturer's label is required. Connection to a different power source than specified may result in improper operation, equipment damage, or a fire hazard.
2. This equipment contains no operator-serviceable parts. Service should only be provided by a qualified service technician.
3. The equipment is provided with a detachable power cord that includes an integral safety ground wire for connection to a grounded safety outlet.
• a. Do not substitute the power cord with a non-approved type. Never use an adapter plug for 2-wire outlets, as this will defeat the grounding wire continuity.
• b. The ground wire is required for safety certification; misuse can create a shock hazard leading to serious injury or death.
• c. Contact a qualified electrician or the manufacturer if you have questions regarding installation before connecting the equipment.
• d. Protective earthing is provided by the Listed AC adapter. Building installation must provide appropriate short-circuit backup protection.
• e. Protective bonding must be installed in accordance with local national wiring rules and regulations.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area are likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

This radio transmitter has been approved by FCC.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This radio transmitter has been approved by ISED Canada.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

French Explanation: Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. l'appareil ne doit pas produire de brouillage; 2. l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement

This equipment complies with radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

French Explanation: AVIS IMPORTANT Déclaration sur l'exposition aux rayonnements: Cet équipement est conforme aux limites prévues pour l'exposition aux rayonnements dans un environnement non contrôlé. Lors de l'installation et de la mise en fonctionnement de l'équipement, assurez-vous qu'il y ait une distance minimale de 20 cm entre l'élément rayonnant et vous. Cet émetteur ne doit être installé à proximité d'aucune autre antenne ni d'aucun autre émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.

Australia and New Zealand

⚠️ Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference.

Brazil

ℹ️ Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

CE Marking

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

Country List: AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SE, SI, SK, UK

ETSI Regulations

Note: This device meets Max. TX power limit per ETSI regulations.

The following apply to products that operate in the 5 GHz frequency range:

• Note: This device is restricted to indoor use only when operating in the 5150 - 5350 MHz frequency range within all member states.
• Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states. Other countries listed may use the 5.8 GHz frequency band.

WEEE Compliance Statement

Information regarding Waste Electrical and Electronic Equipment (WEEE) compliance is provided.

Declaration of Conformity

A declaration of conformity for the product is available.

Online Resources

Further information and support can be found through online resources.