RYOBI 40V Brushless Cordless Leaf Blower, Mulcher, and Vacuum

Introdução

This manual provides essential instructions for the safe and efficient operation, assembly, and maintenance of your RYOBI 40V Brushless Cordless Leaf Blower, Mulcher, and Vacuum. This versatile tool is designed for blowing, vacuuming, and mulching leaves and light debris, utilizing 40V HP Technology for enhanced performance. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: RYOBI 40V Brushless Cordless Leaf Blower, Mulcher, and Vacuum. This image shows the main unit in its vacuum configuration with the collection bag attached.

Características do produto

• Single Tube Design: Functions as a blower, vacuum, and mulcher with a single tube for convenience.
• 40V HP Technology: Delivers increased power for gas-like performance.
• Jet Fan Blower: Provides 600 CFM (Cubic Feet per Minute) for high airflow.
• Speed Tip: Increases air speed up to 100 MPH (Miles Per Hour).
• Variable Speed/Cruise Control: Permite um controle preciso do fluxo de ar.
• Seleção de modo: Easily switch between blow and vacuum modes with a dial.
• Durable Metal Impeller: Designed to shred debris and prevent clogs, achieving a 20:1 mulching ratio.
• Bolsa de coleta: Includes a 10.5-gallon capacity bag for vacuumed debris.
• Arnês ajustável: Provides balance and comfort during extended use.

Configurar

Observação: This product is sold as a tool only. Battery and charger are NOT included and must be purchased separately. Ensure you use a compatible RYOBI 40V battery.

1. Blower Tube Assembly: Align the blower tube with the main unit's outlet and push until it clicks securely into place.
2. Instalação da bateria: Slide a charged RYOBI 40V battery into the battery port on the main unit until it locks. Ensure it is fully seated.
3. Switching to Vacuum Mode: Locate the mode selection dial on the side of the unit. Turn the dial to the 'Vacuum' position.
4. Attaching Collection Bag: Connect the collection bag to the vacuum intake port. Ensure the bag's opening is securely fastened to prevent debris leakage.
5. Attaching Harness: Clip the adjustable harness to the designated attachment points on the unit. Adjust the straps for a comfortable and balanced fit across your shoulder or back.

Instruções de operação

Precauções gerais de segurança

• Always wear safety glasses or goggles and hearing protection during operation.
• Keep bystanders, children, and pets at least 50 feet away from the operating area.
• Do not operate the unit in wet conditions or near water.
• Inspect the work area for objects that could be thrown or entangled in the unit.

Operação de sopro

1. Ensure the unit is in blower mode with the blower tube attached.
2. Hold the unit firmly with one hand on the main handle.
3. Press the trigger to start the blower. The unit features a variable speed trigger; press lightly for lower speed and fully for maximum speed (up to 100 MPH with speed tip).
4. Use the cruise control dial to maintain a desired speed without continuously holding the trigger.
5. Sweep the blower from side to side, moving leaves and debris into piles.

Vacuuming and Mulching Operation

1. Ensure the unit is in vacuum mode with the vacuum tube and collection bag attached.
2. Hold the unit firmly and position the vacuum tube over the debris.
3. Press the trigger to start the vacuum. The durable metal impeller will shred leaves, reducing them at a 20:1 ratio, and collect them in the bag.
4. Move the vacuum tube slowly over the debris, allowing the unit to draw in leaves. Avoid forcing the unit into large piles.
5. Monitore o saco coletor e esvazie-o quando estiver cheio para manter o desempenho ideal.

Manutenção

Limpeza

• Impeller and Debris Chamber: Regularly inspect the impeller and debris chamber for any clogs or wrapped material. Always remove the battery before cleaning. Use a non-metallic tool to carefully clear any obstructions.
• Exterior: Limpe a parte externa da unidade com um pano limpo e seco.amp pano. Não use detergentes ou solventes fortes.
• Bolsa de coleta: Empty the collection bag frequently. Periodically shake out any remaining debris or dust. The bag can be hand-washed with mild soap and water if heavily soiled, then air-dried completely before reattaching.

Cuidados com a bateria

• Carregamento: Always use the RYOBI-approved charger for your 40V battery. Follow the charger's instructions for proper charging.
• Armazenar: Armazene as baterias em local fresco e seco, longe da luz solar direta e de temperaturas extremas. Para armazenamento a longo prazo, certifique-se de que as baterias estejam parcialmente carregadas (cerca de 50%).

Solução de problemas

Especificações

• Marca: RYOBI
• Modelo: RY404015BTL
• Fonte de energia: Alimentado por bateria (íon-lítio de 40V)
• Volumetage: 40 Volts
• Velocidade do ar: Up to 100 MPH (with speed tip)
• Volume de ar: Até 600 CFM
• Proporção de cobertura morta: 20:1
• Capacidade da bolsa coletora: 10.5 galões
• Fator de forma: Portátil
• Recurso especial: Leve
• Peso do item: Aproximadamente 20.1 libras
• Dimensões do produto: 33.5 x 14.25 x 12.6 polegadas
• Código UPC: 046396038869

Garantia e Suporte

For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official RYOBI website. If you require technical assistance, replacement parts, or have questions regarding your RYOBI 40V Brushless Cordless Leaf Blower, Mulcher, and Vacuum, please contact RYOBI customer support through their official website ou as informações de contato fornecidas na documentação do produto.