1. Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your DECKED Truck Bed Storage System, Model YF3. This system is specifically designed for Ford Ranger models manufactured between 2019 and 2023 with a 5-foot bed length. The DECKED system offers secure, weatherproof storage and organization for your truck bed, while maintaining a flat, heavy-duty deck for additional cargo.
Image 1.1: DECKED Truck Bed Storage System installed in a Ford Ranger.
2. Produto acabadoview e Características
The DECKED Drawer System is engineered to maximize storage volume and provide easy access to your equipment, tools, and valuables. It features a robust design that supports up to 1,000 lbs of cargo on its flat top deck, while offering secure, full bed-length drawers below.
Principais características:
- Alta capacidade: Supports up to 1,000 lbs on the deck surface.
- Armazenamento seguro: Drawers are protected by the truck's locking tailgate or an optional keyed lock accessory (not included).
- Projeto à prova de intempéries: Drawer seals are designed to protect contents from car washes, dust, and particulate. Closeout Panels minimize airborne particulates.
- Construção durável: Manufactured from recycled High-Density Polyethylene (HDPE) co-molded to a galvanized steel sub-frame.
- Feito nos EUA: Designed, engineered, and manufactured in the U.S.A.
Acessórios incluídos:
Your DECKED system comes with the following organizational accessories:
- One (1) Desert Tan D-co Case Sixer 16
- One (1) Desert Tan D-co Case Halfrack 32
- One (1) Desert Tan D-Co Bin 32
- Four (4) Stash Bins
- Four (4) D-Ring tie-downs
Image 2.1: Included DECKED organizational accessories.
3. Configuração e instalação
The initial installation of the DECKED system typically takes 2 to 3 hours using common hand tools. After the first assembly, removing or re-installing the system can be completed in approximately 15 minutes.
Compatibilidade:
- Compatible with spray-in bed liners.
- Compatible with most bed rugs.
- NÃO Compatível com revestimentos de plástico removíveis para caçambas.
Dicas de instalação:
- Review the provided instructions thoroughly before beginning. Instructional videos are also available from the manufacturer.
- A second person can be helpful for positioning the main unit into the truck bed due to its size and weight.
- Keep anchor J-bolts loose on each side until the entire system is assembled and positioned correctly, then tighten evenly.
- For Ford models, replacement cab side anchor brackets may be required and are typically provided. A Torx30 driver is needed for this step.
- Installing the rollers under the drawers can be challenging; patience is advised.
Image 3.1: Components of the DECKED system prior to assembly.
4. Instruções de operação
Operação da gaveta:
The DECKED system features two full bed-length drawers for organized storage. To open a drawer, pull the handle firmly. The drawers are designed to extend approximately two-thirds of their length to maintain stability and prevent tipping when loaded. This design requires reaching into the back of the drawer for items stored furthest inside.
Image 4.1: DECKED system with drawers extended.
Utilização do baralho:
The flat top deck of the DECKED system can support up to 1,000 lbs of evenly distributed cargo. Use the integrated D-ring tie-downs to secure items on the deck. The deck surface is slip-resistant for added safety.
Image 4.2: Loading heavy items onto the DECKED system's top deck.
Segurança:
The drawers are secured when the truck's tailgate is closed and locked. For enhanced security, an optional keyed lock accessory can be installed (sold separately).
Image 4.3: Locking the DECKED drawer system.
5. Manutenção
The DECKED Truck Bed Storage System is designed for durability and minimal maintenance. Its construction materials, High-Density Polyethylene and galvanized steel, are resistant to extreme weather and UV light exposure.
Limpeza:
The system can be cleaned with water and mild soap. The weatherproof design allows it to withstand car washes without compromising the contents of the drawers.
Image 5.1: Cleaning the DECKED system.
Drenagem:
The corner 'ammo cans' (storage compartments near the wheel wells) are designed to be weatherproof. If water accumulation is a concern, the manufacturer's instructions may suggest drilling 1/2-inch drain holes in the bottom of these compartments. This modification will affect their ability to hold small items without them falling through.
6. Solução De Problemas
This section addresses common inquiries and minor issues that may arise during the use of your DECKED system.
Drawer Handle Installation Difficulty:
Some users have reported that the handle installation can be challenging. Refer to the specific instructions for handle assembly and ensure all components are aligned correctly before applying force.
Limited Drawer Extension:
The drawers are designed to extend approximately two-thirds of their total length. This is a safety feature to prevent the drawers from tipping when fully loaded. It is not a malfunction. Plan your storage to place frequently accessed items closer to the front of the drawers.
7. Especificações
| Marca | CONVÉM |
| Modelo | YF3 (Drawer System compatible with Ford Ranger (2019-2023) 5') |
| Número do modelo do item | YF3 |
| UPC | 850025181488 |
| Acabamento Exterior | High-Density Polyethylene and Galvanized Steel |
| Material | Polietileno |
| Tipo de bloqueio | Key (optional accessory) |
| Weight Limit (on deck) | 1000 libras |
| Tipo de ajuste automotivo | Ajuste específico do veículo |
8. Garantia e Suporte
Informações sobre garantia:
The DECKED Truck Bed Storage System is guaranteed for life. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official DECKED warranty documentation or contact customer support.
Suporte ao cliente:
For further assistance, technical support, or warranty claims, please contact DECKED customer service through their official website ou as informações de contato fornecidas na embalagem do seu produto.
